Hallo,
I have a problem with master plan setting. I set the field "Explosion" in
master plan
setup ("Master planning/ Setup/ Master plans/ Time Fences") for "Yes" and I
set
explosion time fence for 0 (so planned production orders should not be
exploded into material requirement). Everything works fine - material
requirement
is not calculated, but when I then try to firm production proposal ("Master
planning/
Planned order/ Firmn") new production order is created without any BOM
lines. The route
is OK. The same situation whith master plan setup "Explosion"="No" is OK.
Is it known problem? How to overcome it?
Best regards
Arkadiusz Zimniak
Integris Poznań
tel./fax +4861 8681533, +4861 8681549
e-mail: [EMAIL PROTECTED]
http://www.integris.pl
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/saFolB/TM
---------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
