Thanks for the reply, i have thought about your idea of having sub-
boms for each bom for each warehouse, but it would not be feasiable
as there are over 400 such warehouses...
However, Harry managed to give me the code - it works perfectly -
ticket 7432...
Thanks again for your help
Yifat & team
--- In [EMAIL PROTECTED], "ole_richardt"
<[EMAIL PROTECTED]> wrote:
> Hi Yifat,
>
> The reason why the master scheduling does not populate the
warehouse
> for the raw material is that the default BOM has WH blank on the
BOM
> lines. Axapta therefore goes back to the default, namely the
default
> WH on the Item master. If you have a WH on the BOM line Axapta
will
> use that in the Master Planning also.
>
> You probably have thought about this, but what about the "minimum
> development" procedure (sorry but I�m a consultant) of having 2
> different BOM's each with the WH on the BOM lines. Then when you
> enter either the Sales order or the Forecast, you specify the SUB-
BOM
> and the Master planning will pick up the correct requirements.
>
> You could then use a little development time of enhancing the BOM
> copy function to change the WH on the lines.
>
> If this is not feasible you will have to force the master planning
> explosion, resulting in the reqtrans table to insert a WH on the
> exploded requirement - taken from the demand line (the sales order
or
> forecast)
>
> Hope this helps,
>
> Ole Nielsen
>
>
>
> --- In [EMAIL PROTECTED], "yifath1"
> <[EMAIL PROTECTED]> wrote:
> > Hi there,
> >
> > The problem occurs when you run the master scheduling, it
populates
> > the warehouse for the production order, but it does not populate
> the
> > warehouse for the raw material. For our solution to work (for
our
> > client) we need to be able to run master planning� there is no
> > problem when creating manual production, but this is not the an
> > option at the moment.
> >
> > Thanks
> > Yifat
> >
> >
> > --- In [EMAIL PROTECTED], "Theissen, Annette"
> > <[EMAIL PROTECTED]> wrote:
> > > Does your problem only occur when creating a Production from
> > MasterPlan but
> > > not when creating a Production directly?
> > >
> > >
> > > -----Urspr�ngliche Nachricht-----
> > > Von: mud_mullet [mailto:[EMAIL PROTECTED]
> > > Gesendet: Freitag, 16. April 2004 16:24
> > > An: [EMAIL PROTECTED]
> > > Betreff: [development-axapta] Re: Warehouses in Master Planing
> > >
> > >
> > > I looked at her Discussion And your reply but i am pritty sure
> > that
> > > the changes are not made on the Table they need to be Made in
one
> > of
> > > the classes that are used Maybe the reqcalc Class but im not
sure
> > > where
> > > --- In [EMAIL PROTECTED], "Theissen, Annette"
> > > <[EMAIL PROTECTED]> wrote:
> > > > Hi Jason,
> > > >
> > > > seems like you're working on the same as Yifat does. Why
don't
> > you
> > > have a
> > > > look at the mails titled "Produce the same BOM in 2
independent
> > > warehouses".
> > > >
> > > > Bye, Annette
> > > >
> > > >
> > > > Mit freundlichen Gr��en / Best regards
> > > > Dipl. Phys. Annette Thei�en
> > > > System Software Entwicklung
> > > > ______________________________________________
> > > > Viscom AG - Carl-Buderus-Str. 9-15 - D-30455 Hannover
> > > > Phone: +49/511/94996-0 - Fax: +49/511/94996-900
> > > > mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> -
> > > > http://www.viscom.de <http://www.viscom.de> <
> > http://www.viscom.de/
> > > <http://www.viscom.de/> >
> > > >
> > > > -----Urspr�ngliche Nachricht-----
> > > > Von: mud_mullet [mailto:[EMAIL PROTECTED]
> > > > Gesendet: Freitag, 16. April 2004 15:24
> > > > An: [EMAIL PROTECTED]
> > > > Betreff: [development-axapta] Warehouses in Master Planing
> > > >
> > > >
> > > > Hi all
> > > >
> > > > I have independent warehouses that really produce, purchase
and
> > > sell
> > > > items. However, the item master and bills are shared between
> the
> > > > warehouses i.e. item Z is manufactured in all warehouses
with
> > > > components that sit in the warehouse where it is produced.
> > > >
> > > > Once i create demand for the same item to be produced in
> > warehouse
> > > 1
> > > > and warehouse 2, i run master planning which creates
production
> > > and
> > > > purchases orders for the correct items. However, the
warehouse
> > for
> > > > the components of the the BOM is not populated.
> > > >
> > > >
> > > > Any Help would be Greatly Appreciated
> > > > Thanks in Advance
> > > > Jason
> > > >
> > > >
> > > >
> > > > _____
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > > * To visit your group on the web, go to:
> > > > http://groups.yahoo.com/group/development-axapta/
> > > <http://groups.yahoo.com/group/development-axapta/>
> > > > < http://groups.yahoo.com/group/development-axapta/
> > > <http://groups.yahoo.com/group/development-axapta/> >
> > > >
> > > >
> > > > * To unsubscribe from this group, send an email to:
> > > > [EMAIL PROTECTED]
> > > > <mailto:[EMAIL PROTECTED]
> > > subject=Unsubscribe>
> > > >
> > > >
> > > > * Your use of Yahoo! Groups is subject to the Yahoo!
Terms
> > of
> > > Service
> > > > < http://docs.yahoo.com/info/terms/
> > <http://docs.yahoo.com/info/terms/> >
> > > .
> > >
> > >
> > >
> > > _____
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > > * To visit your group on the web, go to:
> > > http://groups.yahoo.com/group/development-axapta/
> > > <http://groups.yahoo.com/group/development-axapta/>
> > >
> > >
> > > * To unsubscribe from this group, send an email to:
> > > [EMAIL PROTECTED]
> > > <mailto:[EMAIL PROTECTED]
> > subject=Unsubscribe>
> > >
> > >
> > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service
> > > <http://docs.yahoo.com/info/terms/> .
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
