As your development are done on SP1 or SP2, some standard method
you used before were being changed in SP3. So, other than compare the
customized object in the Upgrade Project generated by the upgrade check
list. You need to re-compile the whole application so that you can get ALL
this kinds of updated method in your application.
Cliff
_____
From: Tony Chan [mailto:[EMAIL PROTECTED]
Sent: Monday, May 10, 2004 5:27 PM
To: '[EMAIL PROTECTED]'
Subject: [development-axapta] Axapta SP3
Hi all,
I had applied SP3 to my Axapta3.0, but something wents wrong . I had the
following error :
inventjournaltrans.inventmovement().journalSetInventDimField(inventdim)
becomes invalid, and it need 2 parameters as following :
inventjournaltrans.inventmovement().journalSetInventDimField(inventdim,
fieldid)
Since I got so many of these kind of error, is anyone have idea how to fix
it, and where can I get the info of what parameters should I pass in these
example.
I had check the code upgrade and nothing see wrong ???
thanks.
Best Regards,
Tony.
[Non-text portions of this message have been removed]
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.
[Non-text portions of this message have been removed]
| Yahoo! Groups Sponsor | |
|
|
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
