set you realtionship in the join as 1:1 otherwise oyu will notice the lines
that supposedly show okay are actually showing the wrong PO name for the
line!!! (they are showing the PO name of the line above...the first line is
blank becasue it has no line before it...)
-----Original Message-----
From: Jens Strandberg [mailto:[EMAIL PROTECTED]
Sent: 01 November 2004 21:37
To: [EMAIL PROTECTED] Com (E-mail)
Subject: [development-axapta] Report problem.
Hello there,
I have this strange problem in some (simple) reports. Let's say that I
wish
to list certain fields from table InventTrans. I would only be interested
in
information from PO's.
I could then include physical date, transrefid (=PO number), qty etc.
Also,
I would like to display the field PurchName from the PO. I then add
PurchTable as a new data source and setup the proper relations.
The problem: The FIRST line in the report does not display the PurchName
info. The rest of the lines display the value properly.
Any obvious pointers that I have missed ? Thanks in advance !
Best Regards,
/Jens
Yahoo! Groups Sponsor
Get unlimited calls to
U.S./Canada
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
b.. To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
| Yahoo! Groups Sponsor | |
|
|
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
