HI,
Have fun. You can not print Vertical and horizontal on the same report within Ax. I solved the problem by writing on a plain text printer, sending the native printer codes to a barcode printer. Not a nice solution, but it worked. The best solution is to look for a barcode printing software or a output management system. Mit freundlichen Grüßen / Best regards / Med venlig hilsen Jesper Jørgensen / Abt. NMT-XD Senior Product Manager arvato systems | Technologies GmbH An der Autobahn 18 33311 Gütersloh [EMAIL PROTECTED] <blocked::blocked::blocked::mailto:[EMAIL PROTECTED]> Phone: +49 5242 / 40 80 54 Fax: +49 5242 / 40 80 40 Mobile: +49 172 / 571 03 34 http://www.as-T.biz <blocked::blocked::http://www.as-t.biz/> arvato systems | Technologies GmbH Joachim-Jungius-Str. 9, 18059 Rostock Geschäftsführung: Erwin Pietz, Matthias Moeller Amtsgericht Rostock - HRB 7497 ________________________________ "Der Inhalt dieser Nachricht oder eventueller Anlagen ist vertraulich und ausschließlich für den bezeichneten Adressaten bestimmt. Bitte stellen Sie sicher, dass die Information in dieser Nachricht ausschließlich an die adressierten Personen gelangt. Sollte diese Nachricht versehentlich an Sie gesendet worden sein, dann informieren Sie bitte umgehend den Absender und löschen Sie die Nachricht. Vielen Dank." "The information in this e-mail and any attachments is confidential. The information must only be held in areas that have controlled and limited access to the addressed persons. If this e-mail has been sent to you in error, please immediately notify the sender and delete the e-mail. Thanks." ________________________________ ________________________________ Von: development-axapta@yahoogroups.com [mailto:[EMAIL PROTECTED] Im Auftrag von tkbsmanian Gesendet: Dienstag, 1. Juli 2008 09:56 An: development-axapta@yahoogroups.com Betreff: [development-axapta] Printing BarCode Vertically in Report. Urgent!!! Hi, i've an requirement to ptint the bar code vertically (rotating to 90 degree against default) in reports. Since barcode is a string and there is no rotating properties available, the idea is capture the barcode as image and rotate that into 90 degrees in report. But, struck with capturing the image of the barcode. are any methods there in Axapta to capture the particular field as image? Any other ideas to print barcode vertically should also be appreciated. Thanks in Advance. [Non-text portions of this message have been removed]
