I found another interesting package: ettercap I thought that could maybe do the trick... However, there seems to be not enough space on the fonera to install it, and I therefore installed the package in /tmp I had to install a whole bunch of libraries as well I could execute the ettercap command then, but, unlike on my Mac OSX box, it did exit immediately, claiming that it had to disable forwarding but could not reenable it. I could not reenable forwarding manually as well (by restarting network, firewall etc.) and I had to reboot my fonera. Why was that? I also tested the logging feature of iptables. But that did as well not work as expected. If I log all connections via ppp0, the only thing that is logged are the connections of ppp0 with its counterpart, e.g. my service provide, but not the websites that were actually visited. I could of course install ettercap on an external linux-box, but I'd rather prefer to have everything running on the router... snmp works more or less fine now, at least. Thanks again, Steven! According to the manual, the missing mib files seem to be "normal". After copying the configuration files in /etc/snmp/, I can retrive at least some information. However, how would I get information about the websites visited through the router? I tried several commands and even a gui-based snmp-management software - without any success, unfortunately. Which command line would I use to log the websites (e.g. snmpwalk?) Any hints? Thanks, Chris
On Sun, Dec 20, 2009 at 8:59 AM, Steven Leeman <[email protected]> wrote: > > > On Sat, Dec 19, 2009 at 10:26 PM, Christopher Intemann <[email protected] > > wrote: > >> Steven, >> thank you, that looks very prospecting! Searched on the web for sth. like >> that for ages! >> I guess the first part (SNMP native sensors) belongs in the MIB-File. >> However. Where will I have to put the MIB-File then? >> Thank you! >> Chris >> > > > cp MY-MIB.txt /usr/share/snmp/mibs > > >> >> On Sat, Dec 19, 2009 at 10:16 PM, Steven Leeman <[email protected]> wrote: >> >>> >>> >>> On Sat, Dec 19, 2009 at 10:06 PM, Christopher Intemann < >>> [email protected]> wrote: >>> >>>> Hi, >>>> I installed snmpd on my fonera. >>>> The install was pretty straight forward. Nice! >>>> I can now connect to the box from my computer and read out >>>> snmp-information. >>>> At least some - when I try to get traffic information, I receive the >>>> message snmp v1 not supported (or sth). >>>> However, the installation does not seem to be compete, since I get a >>>> bunch of error messages claiming missing mib-files on the router. >>>> Indeed I cannot find mib-files, nor a directory where they are supposed >>>> to be found. >>>> Where do I get the mib-files and where do I put them? >>>> Thanks, >>>> Chris >>>> >>> >>> could the following be of use: >>> >>> http://axelvigo.com/cisco/InstallSnmp.html >>> http://glr81.free.fr/pages/openwrt-snmp-oid.htm >>> >>> _______________________________________________ >>> Development mailing list >>> [email protected] >>> http://fonosfera.org/mailman/listinfo/development >>> >>> >> >> _______________________________________________ >> Development mailing list >> [email protected] >> http://fonosfera.org/mailman/listinfo/development >> >> > > _______________________________________________ > Development mailing list > [email protected] > http://fonosfera.org/mailman/listinfo/development > >
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
