Hello, I'm new to the list and to the development in the fonera. I've been trying to make a cp2101 device in the fonera2.0 without luck so far. I've been able to compile and load the cp2101 module in the kernel, but once the device is connected, no /dev/ttyUSB0 appears (and it should). The device is a telegesis ETRX2 USB stick (it shouldn't matter). The dmesg output in my pc when I connect the device is: [102652.037054] usb 2-1.3: new full speed USB device using uhci_hcd and address 3 [102652.179477] usb 2-1.3: configuration #1 chosen from 1 choice [102652.263658] usbcore: registered new interface driver usbserial [102652.263679] USB Serial support registered for generic [102652.263720] usbcore: registered new interface driver usbserial_generic [102652.263723] usbserial: USB Serial Driver core [102652.276395] USB Serial support registered for cp2101 [102652.276441] cp2101 2-1.3:1.0: cp2101 converter detected [102652.365058] usb 2-1.3: reset full speed USB device using uhci_hcd and address 3 [102652.493198] usb 2-1.3: cp2101 converter now attached to ttyUSB0 [102652.493225] usbcore: registered new interface driver cp2101 [102652.493230] cp2101: v0.07:Silicon Labs CP2101/CP2102 RS232 serial adaptor driver In the fonera I get: usbserial: USB Serial support registered for cp2101 usbcore: registered new interface driver cp2101 cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
Any idea on how to solve this? -- Jordi Soucheiron Software Engineer DEXMA Parc Tecnològic la Salle Sant Joan de la Salle, 42 08022 Barcelona t/f: [+34] 93 181 01 95 www.dexmatech.com [email protected] _______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
