Hello, I can't use my "Nokia 6120 classic" with my Fonera 2.0n. The
phone is not listed in the list of supported devices, but maybe, with
your help, I can get it working.
The phone doesn't get recognized and the "x" on the "UMTS/3G" icon never
disappears.
Thanks,
Lorenzo
When I plug the cell phone this is what I get from dmesg:
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 1-1: new full speed USB device using dwc_otg and address 4
usb 1-1: skipped 3 descriptors after interface
usb 1-1: skipped 3 descriptors after interface
usb 1-1: skipped 3 descriptors after interface
usb 1-1: skipped 1 descriptor after interface
usb 1-1: skipped 3 descriptors after interface
usb 1-1: skipped 3 descriptors after interface
usb 1-1: skipped 3 descriptors after interface
usb 1-1: skipped 3 descriptors after interface
usb 1-1: skipped 4 descriptors after interface
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Nokia 6120 classic
usb 1-1: Manufacturer: Nokia
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
usb 1-1: adding 1-1:1.1 (config #1, interface 1)
usb 1-1:1.1: uevent
usb 1-1: adding 1-1:1.2 (config #1, interface 2)
usb 1-1:1.2: uevent
usb 1-1: adding 1-1:1.3 (config #1, interface 3)
usb 1-1:1.3: uevent
usb 1-1: adding 1-1:1.4 (config #1, interface 4)
usb 1-1:1.4: uevent
usb 1-1: adding 1-1:1.5 (config #1, interface 5)
usb 1-1:1.5: uevent
usb 1-1: adding 1-1:1.6 (config #1, interface 6)
usb 1-1:1.6: uevent
usb 1-1: adding 1-1:1.7 (config #1, interface 7)
usb 1-1:1.7: uevent
usb 1-1: adding 1-1:1.8 (config #1, interface 8)
usb 1-1:1.8: uevent
usb 1-1: adding 1-1:1.9 (config #1, interface 9)
usb 1-1:1.9: uevent
usb 1-1: adding 1-1:1.10 (config #1, interface 10)
usb 1-1:1.10: uevent
usb 1-1: adding 1-1:1.11 (config #1, interface 11)
usb 1-1:1.11: uevent
usb 1-1: adding 1-1:1.12 (config #1, interface 12)
usb 1-1:1.12: uevent
usb 1-1: adding 1-1:1.13 (config #1, interface 13)
usb 1-1:1.13: uevent
drivers/usb/core/inode.c: creating file '004'
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
hub 1-0:1.0: port 1 enable change, status 00000103
_______________________________________________
Development mailing list
[email protected]
http://fonosfera.org/mailman/listinfo/development
