I did test power issues (results can be found on fon forum, a year or so ago) and even interconnected the 4 resistors in my hub to get 2Amp of power (just to make shure ;-) but that didn' t change anything.
2010/8/25 fon-ng <[email protected]> > #857: 3G Dongle does not work with USB hub > > ---------------------------------------+------------------------------------ > Reporter: [email protected] | Owner: > Type: bug | Status: infoneeded > Priority: normal | Milestone: Firmware 2.3 > Component: fon-network-3g | Version: 2.3.6.0 (Gari) > Severity: unknown | Resolution: > Keywords: | Hardware: 2.0n (FON2300) > > ---------------------------------------+------------------------------------ > Changes (by matthijs): > > * status: investigate => infoneeded > > > Comment: > > The devices_direct.txt file is fine, the devices_through-hub.txt file is a > bit weird (looks like you copied the output, pasted in the PuTTY window > again and then copied the (garbled) result). > > > If have a powered hub, I would prefer that (just to rule out any power > issues). > > As for the device numbers, from the logread outputs we see that in both > cases ttyUSB0 and ttyUSB1 are assigned. AFAIK, the order of these devices > always matches the order of the USB device's interfaces... > > -- > Ticket URL: <http://trac.fonosfera.org/fon-ng/ticket/857#comment:21> > fon-ng <http://www.fonosfera.org/> > fonosfera.org - by FON >
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
