Hi Paolo, > Although the fonera2.0n is connected and the whole system seems to > work, the connection speed is very low and normally web-pages such > as mail take a lot of time to load and several times I have to > reload the page. Hmm, not sure why that is happening. Are both of the signals 11n?
> Furthermore, the devise is places outside and it is oriented towards > the original source. Looking to the physical interfaces I have seen > that the private wifi as the same channel of the origin one. This > could be physical issue, due to the same frequency used by two > different wifi. Indeed, the 2.0n only has a single radio that it uses for both the wifi client and the AP connections, so it must always use the same signal for both. > Is there the possibility to change the two channels from command > line to run few tests? You'll have to change the channel in the upstream access point, the 2.0n just copies that channel onto it's AP side. Regards, Matthijs Kooijman _______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
