- Update from version 5.6.3 to 5.8.0
- branch 5.8 is the new stable branch. Branch 5.6 from now on will only get
critical
fixes, there will be no new releases on that old branch.
- Update of rootfile
- Changlog
5.8.0
This bumps the minor version of liblzma because new features were
added. The API and ABI are still backward compatible with liblzma
5.6.x, 5.4.x, 5.2.x, and 5.0.x.
* liblzma on 32/64-bit x86: When possible, use SSE2 intrinsics
instead of memcpy() in the LZMA/LZMA2 decoder. In typical cases,
this may reduce decompression time by 0-5 %. However, when built
against musl libc, over 15 % time reduction was observed with
highly compressed files.
* CMake: Make the feature test macros match the Autotools-based
build on NetBSD, Darwin, and mingw-w64.
* Update the Croatian, Italian, Portuguese, and Romanian
translations.
* Update the German, Italian, Korean, Romanian, Serbian, and
Ukrainian man page translations.
Summary of changes in the 5.7.x development releases:
* Mark the following LZMA Utils script aliases as deprecated:
lzcmp, lzdiff, lzless, lzmore, lzgrep, lzegrep, and lzfgrep.
* liblzma:
- Improve LZMA/LZMA2 encoder speed on 64-bit PowerPC (both
endiannesses) and those 64-bit RISC-V processors that
support fast unaligned access.
- Add low-level APIs for RISC-V, ARM64, and x86 BCJ filters
to lzma/bcj.h. These are primarily for erofs-utils.
- x86/x86-64/E2K CLMUL CRC code was rewritten.
- Use the CRC32 instructions on LoongArch.
* xz:
- Synchronize the output file and its directory using fsync()
before deleting the input file. No syncing is done when xz
isn't going to delete the input file.
- Add --no-sync to disable the sync-before-delete behavior.
- Make --single-stream imply --keep.
* xz, xzdec, lzmainfo: When printing messages, replace
non-printable characters with question marks.
* xz and xzdec on Linux: Support Landlock ABI versions 5 and 6.
* CMake: Revise the configuration variables and some of their
options, and document them in the file INSTALL. CMake support
is no longer experimental. (It was already not experimental
when building for native Windows.)
* Add build-aux/license-check.sh.
5.6.4
* liblzma: Fix LZMA/LZMA2 encoder on big endian ARM64.
* xz:
- Fix --filters= and --filters1= ... --filters9= options
parsing. They require an argument, thus "xz --filters lzma2"
should work in addition to "xz --filters=lzma2".
- On the man page, note in the --compress and --decompress
options that the default behavior is to delete the input
file unless writing to standard output. It was already
documented in the DESCRIPTION section but new users in
a hurry might miss it.
* Windows (native builds, not Cygwin): Fix regressions introduced
in XZ Utils 5.6.3 which caused non-ASCII characters to display
incorrectly. Only builds with translation support were affected
(--enable-nls or ENABLE_NLS=ON). The following changes affect
builds that have translations enabled:
- Require UCRT because MSVCRT doesn't support UTF-8
locales and thus translations won't be readable on
Windows 10 version 1903 and later. (MSVCRT builds
are still possible with --disable-nls or ENABLE_NLS=OFF.)
- Require gettext-runtime >= 0.23.1 because older versions
don't autodetect the use of the UTF-8 code page. This
resulted in garbled non-ASCII characters even with UCRT.
- Partially fix alignment issues in xz --verbose --list
with translated messages. Chinese (simplified),
Chinese (traditional), and Korean column headings
are misaligned still because Windows and MinGW-w64
don't provide wcwidth() and XZ Utils doesn't include
a replacement function either.
* CMake: Explicitly disable unity builds. This prevents build
failures when another project uses XZ Utils via CMake's
FetchContent module, and that project enables unity builds.
* Update Chinese (traditional) and Serbian translations.
Signed-off-by: Adolf Belka <[email protected]>
---
config/rootfiles/common/xz | 54 +++++++++++++++++++++++++++++++++++++-
lfs/xz | 6 ++---
2 files changed, 56 insertions(+), 4 deletions(-)
diff --git a/config/rootfiles/common/xz b/config/rootfiles/common/xz
index cd64e2c31..3873744c8 100644
--- a/config/rootfiles/common/xz
+++ b/config/rootfiles/common/xz
@@ -41,7 +41,7 @@ usr/bin/xzmore
#usr/lib/liblzma.la
#usr/lib/liblzma.so
usr/lib/liblzma.so.5
-usr/lib/liblzma.so.5.6.3
+usr/lib/liblzma.so.5.8.0
#usr/lib/pkgconfig/liblzma.pc
#usr/share/doc/xz
#usr/share/doc/xz/AUTHORS
@@ -74,7 +74,9 @@ usr/lib/liblzma.so.5.6.3
#usr/share/locale/hr/LC_MESSAGES/xz.mo
#usr/share/locale/hu/LC_MESSAGES/xz.mo
#usr/share/locale/it/LC_MESSAGES/xz.mo
+#usr/share/locale/ka/LC_MESSAGES/xz.mo
#usr/share/locale/ko/LC_MESSAGES/xz.mo
+#usr/share/locale/nl/LC_MESSAGES/xz.mo
#usr/share/locale/pl/LC_MESSAGES/xz.mo
#usr/share/locale/pt/LC_MESSAGES/xz.mo
#usr/share/locale/pt_BR/LC_MESSAGES/xz.mo
@@ -124,6 +126,31 @@ usr/lib/liblzma.so.5.6.3
#usr/share/man/fr/man1/xzcat.1
#usr/share/man/fr/man1/xzdec.1
#usr/share/man/fr/man1/xzless.1
+#usr/share/man/it
+#usr/share/man/it/man1
+#usr/share/man/it/man1/lzcat.1
+#usr/share/man/it/man1/lzcmp.1
+#usr/share/man/it/man1/lzdiff.1
+#usr/share/man/it/man1/lzegrep.1
+#usr/share/man/it/man1/lzfgrep.1
+#usr/share/man/it/man1/lzgrep.1
+#usr/share/man/it/man1/lzless.1
+#usr/share/man/it/man1/lzma.1
+#usr/share/man/it/man1/lzmadec.1
+#usr/share/man/it/man1/lzmainfo.1
+#usr/share/man/it/man1/lzmore.1
+#usr/share/man/it/man1/unlzma.1
+#usr/share/man/it/man1/unxz.1
+#usr/share/man/it/man1/xz.1
+#usr/share/man/it/man1/xzcat.1
+#usr/share/man/it/man1/xzcmp.1
+#usr/share/man/it/man1/xzdec.1
+#usr/share/man/it/man1/xzdiff.1
+#usr/share/man/it/man1/xzegrep.1
+#usr/share/man/it/man1/xzfgrep.1
+#usr/share/man/it/man1/xzgrep.1
+#usr/share/man/it/man1/xzless.1
+#usr/share/man/it/man1/xzmore.1
#usr/share/man/ko
#usr/share/man/ko/man1
#usr/share/man/ko/man1/lzcat.1
@@ -210,6 +237,31 @@ usr/lib/liblzma.so.5.6.3
#usr/share/man/ro/man1/xzgrep.1
#usr/share/man/ro/man1/xzless.1
#usr/share/man/ro/man1/xzmore.1
+#usr/share/man/sr
+#usr/share/man/sr/man1
+#usr/share/man/sr/man1/lzcat.1
+#usr/share/man/sr/man1/lzcmp.1
+#usr/share/man/sr/man1/lzdiff.1
+#usr/share/man/sr/man1/lzegrep.1
+#usr/share/man/sr/man1/lzfgrep.1
+#usr/share/man/sr/man1/lzgrep.1
+#usr/share/man/sr/man1/lzless.1
+#usr/share/man/sr/man1/lzma.1
+#usr/share/man/sr/man1/lzmadec.1
+#usr/share/man/sr/man1/lzmainfo.1
+#usr/share/man/sr/man1/lzmore.1
+#usr/share/man/sr/man1/unlzma.1
+#usr/share/man/sr/man1/unxz.1
+#usr/share/man/sr/man1/xz.1
+#usr/share/man/sr/man1/xzcat.1
+#usr/share/man/sr/man1/xzcmp.1
+#usr/share/man/sr/man1/xzdec.1
+#usr/share/man/sr/man1/xzdiff.1
+#usr/share/man/sr/man1/xzegrep.1
+#usr/share/man/sr/man1/xzfgrep.1
+#usr/share/man/sr/man1/xzgrep.1
+#usr/share/man/sr/man1/xzless.1
+#usr/share/man/sr/man1/xzmore.1
#usr/share/man/uk
#usr/share/man/uk/man1
#usr/share/man/uk/man1/lzcat.1
diff --git a/lfs/xz b/lfs/xz
index aa04a8d3a..511848c1d 100644
--- a/lfs/xz
+++ b/lfs/xz
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2024 IPFire Team <[email protected]> #
+# Copyright (C) 2007-2025 IPFire Team <[email protected]> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -24,7 +24,7 @@
include Config
-VER = 5.6.3
+VER = 5.8.0
THISAPP = xz-$(VER)
DL_FILE = $(THISAPP).tar.xz
@@ -45,7 +45,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 =
7c75a334abdec370d03bea1d07f9211069633e2851e304f189b6b316d9c8363350849404cff318310c3d4a6d2ec6439e64e074f40d7ad5f02ff101757de27f99
+$(DL_FILE)_BLAKE2 =
5087c88884a857b96bc5658548fc9b07ab2f14fe9eabfaeaa19e21810e7588c97621db08353632bd56e66ae2085ec5adc421c4d6849525b630d56dadd65c9f81
install : $(TARGET)
--
2.49.0
