Hello Peter, Thanks for the updated patch.
I applied it, but there were further changes necessary because if an update has been applied more than once, it would have broken the IPsec configuration. The update also needed to happen when a backup is being restored, and vpnmain.cgi needs to be called as nobody only. Please review these changes: https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=6ed4634be943fe125b61f0348063016fcacb89ee https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=5d0b4d3b9df0d93aeb3d2400550c5ee355ba7146 Best, -Michael > On 26 May 2025, at 19:28, Peter Müller <[email protected]> wrote: > > This causes existing IPsec connections using ML-KEM to always use it in > conjunction with Curve 25519, in line with the changes > dfa7cd2bbac3c746569368d70fefaf1ff4e1fed2 > implements for newly configured IPsec connections. > > Again, we can reasonably assume an IPsec peer supporting ML-KEM also > supports Curve 25519. In case such a peer does not support RFC 9370, and > the IPsec connection was created using our default ciphers, it will fall > back to Curve 448, Curve 25519, or any other traditional algorithm. > > This patch will break existing IPsec connections only if they are > exclusively using ML-KEM (which means the IPFire user reconfigured them > manually using the "advanced connection settings" section in the WebUI), > and the IPsec peer is configured in the same manner, and/or is an IPFire > machine not yet updated to Core Update 196. Any other IPFire-to-IPFire > IPsec connection will continue working, potentially falling back to > Curve 448 or 25519 until both peers are updated to Core Update 196, > after which ML-KEM in conjunction with Curve 25519 will be used again. > > The second version of this patch modifies IPFire's own configuration > file for IPsec connections, rather than applying these changes directly > to /etc/ipsec.conf, where they would have been overwritten by the next > WebUI change. > > Signed-off-by: Peter Müller <[email protected]> > --- > config/rootfiles/core/196/update.sh | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/config/rootfiles/core/196/update.sh > b/config/rootfiles/core/196/update.sh > index 0138fabcf..b8f92322f 100644 > --- a/config/rootfiles/core/196/update.sh > +++ b/config/rootfiles/core/196/update.sh > @@ -32,6 +32,7 @@ for (( i=1; i<=$core; i++ )); do > done > > # Stop services > +/etc/rc.d/init.d/ipsec stop > > # Remove files > rm -rfv \ > @@ -65,7 +66,17 @@ esac > # Apply SSH configuration > #/usr/local/bin/sshctrl > > +# Change IPsec configuration of existing connections using ML-KEM > +# to always make use of hybrid key exchange in conjunction with Curve 25519. > +sed -i -e "s@mlkem@x25519-ke1_mlkem@g" /var/ipfire/vpn/config > + > +# Apply changes to ipsec.conf > +/srv/web/ipfire/cgi-bin/vpnmain.cgi > + > # Start services > +if grep -q "ENABLED=on" /var/ipfire/vpn/settings; then > + /etc/rc.d/init.d/ipsec start > +fi > > # This update needs a reboot... > #touch /var/run/need_reboot > -- > 2.43.0 >
