Hi @all,
I've also stumbled over this issue from time to time.
So let's give the fix a try.
Best regards,
-Stefan
Am 8. Juni 2026 18:14:30 schrieb Adolf Belka <[email protected]>:
Hi Michael and Matthias,
On 08/06/2026 16:09, Matthias Fischer wrote:
On 08.06.2026 16:03, Michael Tremer wrote:
Hello Matthias,
Hi Michael,
On 8 Jun 2026, at 12:58, Matthias Fischer <[email protected]> wrote:
Hi all,
I'd like to warm up an old problem...perhaps I found something like a
solution.
The original problem is rather old - it dates from 2025-01-15. It still
can be found here:
https://marc.info/?l=ipfire-development&m=173691503411708
Once in a while I experienced the same problem like Jon - building
stopped suddenly: "./make.sh build goes into a loop and builds an item
forever." And it doesn't matter which item. Either the counter kept
running indefinitely, or it stopped displaying anything at all.
That was pretty annoying. No errors, nothing in the logs. After stopping
the build with CTRL-C and restarting the whole build, usually everything
ran through and worked again as if nothing had happened.
The last message often was just "make: Leaving directory '/usr/src/lfs'"
and that was all.
Lastly I was thinking it might have something to do with counters.
So I changed "while sleep 1" to "while sleep 2" in 'make.sh'. Nothing more.
Since then buildings are running without stopping anymore...
Did anyone had similar problems?
Very rarely. I think I have seen it before, but I cannot reproduce it at all.
Yep. It happens just now and then, you never know when and why...
I also very occasionally get the same problem. I have also had it when
doing a build on the IPFire aarch64 and riscv64 builder.
I am happy to remove the timer entirely because it would be sufficient to
see the build time after the package has finished building.
+1. You got my vote. The simpler, the better.
Would anyone be opposed to that?
No. ;-)
I have no problems with that.
Regards,
Adolf.
Best
Matthias
--
Sent from my laptop
