Hi All,

We have now finalized the testing for 4.8.1 release, please tag the 4.8.1 
release for the sha1.

Qt 4.8.1 sha1 == 1e0021d8d9e374ae3959fcd4eac5d9e7238cbc54
http://qt.gitorious.org/qt/qt/commit/1e0021d8d9e374ae3959fcd4eac5d9e7238cbc54

Enclosed, please find the final changes file of 4.8.1 release corresponding the 
sha1.

We have already built the standalone installers and done release testing based 
on them. Next we need to decide where to distribute the installers.

Would it be possible to use the existing Nokia servers to distribute also the 
4.8.1 created by us for the Qt Project? There is likely quite much load when 
the release is out, so it would be great if we can have it distributed with the 
same infra as 4.8.0 and earlier versions.

Br,
Akseli


From: [email protected] 
[mailto:[email protected]] On Behalf 
Of Salovaara Akseli
Sent: 9. maaliskuuta 2012 13:25
To: [email protected]; [email protected]
Subject: [Releasing] Qt 4.8.1 open source release date approaching..

Hi,

We are currently preparing & testing Qt 4.8.1 open source release for next 
week. Exact release date is still open, until all tests are passed. And, as 
discussed it is possible that critical problems are found, and then we need to 
take another try.

We are currently testing against sha1 that points to commit: 
1e0021d8d9e374ae3959fcd4eac5d9e7238cbc54

Latest version of changes-4.8.1 file is found attached. Again, this may not yet 
be the final one, we need to first test.

In addition to the testing we are conducting, it is good to hear user feedback. 
So, please feel free to test and send feedback to 
[email protected]<mailto:[email protected]> mailing list.

Br,
Akseli

Akseli Salovaara
Software Specialist, Qt Commercial R&D

DIGIA Plc
Piippukatu 11, FI-40101 Jyväskylä Finland
Email: [email protected]<mailto:[email protected]>

Visit us at: www.digia.com<http://www.digia.com/> or qt.digia.com

------------------------------------------------------------------
PRIVACY AND CONFIDENTIALITY NOTICE
This message and any attachments are intended only for use by the named 
addressee and may contain privileged and/or confidential information. If you 
are not the named addressee you should not disseminate, copy or take any action 
in reliance on it. If you have received this message in error, please contact 
the sender immediately and delete the message and any attachments accompanying 
it. DIGIA Plc does not accept liability for any corruption, interception, 
amendment, tampering or viruses occurring to this message.
------------------------------------------------------------------

Attachment: changes-4.8.1
Description: changes-4.8.1

_______________________________________________
Development mailing list
[email protected]
http://lists.qt-project.org/mailman/listinfo/development

Reply via email to