I flashed with the latest images from the alternative site (chooseopen.com). I had to change the root password on the device and use that to ssh with. It worked as advertised with that exception.
Johan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of andrej w. Sent: Tuesday, July 31, 2007 11:43 AM To: [EMAIL PROTECTED] Cc: [email protected] Subject: Re: Help with DFU Mode (P1 Device) Hi, i think it is irrelevant when to fire up the dfu-util, as long as you changed the state of the console input (that is "Set console to USB"), right? Did anybody managed to gain remote ssh access to the unit? I am constantly getting "connection refused" errors, while trying. Btw. I have used yesterdays rootfs and kernel images (2007_07_30). awu Peter Trapp schrieb: > On Monday 30 July 2007 01:19, Bobby Edmonds wrote: > >> I cannot get my unit into DFU Mode. >> >> When I get the boot menu if I do a "dfu-util -l" I get the following >> (Runtime Mode): >> >> dfu-util - (C) 2007 by OpenMoko Inc. >> This program is Free Software and has ABSOLUTELY NO WARRANTY >> >> Found DFU Runtime: [0x1457:0x5119] devnum=18, cfg=0, intf=2, alt=0, >> name="USB Device Firmware Upgrade" >> >> If I select "Set console to USB" it briefly displays another screen that >> says "Press [AUX] to return to boot menu" and then rolls back to the >> boot menu. >> >> > > I guess you've already done it, so for all others... > > I figured out the same :) My workaround is quite easy. > > 1) prepare everything at the host side (including the ./dfu-util ) > 2) "Set console to USB" and press "power" > 3) asap Neo changes to "Press [AUX] to return to boot menu" fire the dfu-util > command on host side > > Note: Neo switches back to the "boot-menu" but as long as the host doesn't > tell you anything different it should work :) > > -homyx > > >
