Thank you all! Now it's working OK! One important thing was: $ usermod -G uucp linda $ usermod -G uucp root //Linda
On 12/31/07, Linda Lind <[EMAIL PROTECTED]> wrote: > Wondeful!!!!!! > Thank you! > I do this next year! > Happy new year!! > //Linda**** > > 2007/12/31, Peter Rasmussen <[EMAIL PROTECTED]>: > > Well, I thought I'd better see what the Qtopia image has to offer and > > actually, the latest release (27112007) seems to be the best working > > image yet, eg. voice _and_ SMS seems to work. > > > > The link to the archive file, Qtopia flash image for FIC Neo 1973, > > mentioned below is correct: > > > > http://www.qtopia.net/modules/mydownloads/singlefile.php?lid=50 > > > > Get that and save it on your computer. It should be: > > "qtopia-4.3.1-snapshot-1127.tgz" > > > > Unpack it with: > > > > tar zxvf qtopia-4.3.1-snapshot-1127.tgz > > > > This should make you have the following two files, ie. a kernel file and > > a rootfs file: > > > > -rw-r--r-- 1 plr 1000 31956148 2007-11-27 06:55 > > qtopia-rootfs.2-11270550.jffs2 > > -rw-r--r-- 1 plr 1000 1538620 2007-11-10 20:57 > > uImage-2.6.22.5-moko11+svnr3238-r7-neo1973.bin > > > > You already have a dfu-util utility, and I hope the one you have, work > > with these files. I believe I have encountered situations where a rootfs > > file wasn't compatible with the dfu-util at hand. I used the following > > this time, and it seemed to work: > > > > http://buildhost.automated.it/OM2007.2/dfu-util > > > > Ensuring that you have: > > > > 1. The necessary permissions > > 2. dfu-util is executable > > 3. Your Neo is in uboot mode > > 4. And a USB cable is connected between your computer and the Neo > > 5. Realize that the following is low-level stuff and doing something > > wrong may brick your Neo > > > > execute the following from a command line: > > > > cu -l /dev/ttyACM0 > > > > Which should get you the following: > > > > Connected. > > In: usbtty > > Out: usbtty > > Err: usbtty > > GTA01Bv4 # DEVICE_CONFIGURED: 1 > > Enabling automatic fast charge > > > > Press <Enter> and you should get: > > > > GTA01Bv4 # > > > > At that prompt type: > > > > nand erase rootfs > > > > and the <Enter> key, which should get you: > > > > NAND erase: device 0 offset 0x2e4000, size 0x3d1c000 > > OK > > GTA01Bv4 # > > > > At that prompt don't press anything else, but: > > > > ~. > > > > and the <Enter> key, which should disconnect you from the bootloader. > > > > Incidentally, what version of uboot are you running? It is the long > > string appearing above "*** BOOT MENU ***" while in uboot mode that > > tells you the uboot version and release name. > > > > Now, from the computer prompt, execute the following: > > > > ./dfu-util -a kernel -R -D uImage-2.6.22.5-moko11+svnr3238-r7-neo1973.bin > > > > which should get you the following, and it should only take a few > > seconds to finish: > > > > dfu-util - (C) 2007 by OpenMoko Inc. > > This program is Free Software and has ABSOLUTELY NO WARRANTY > > > > Opening USB Device 0x0000:0x0000... > > Claiming USB DFU Runtime Interface... > > Determining device status: state = appIDLE, status = 0 > > Device really in Runtime Mode, send DFU detach request... > > Resetting USB... > > Opening USB Device... > > Found Runtime: [0x1457:0x5119] devnum=3, cfg=0, intf=0, alt=3, name="kernel" > > Claiming USB DFU Interface... > > Setting Alternate Setting ... > > Determining device status: state = dfuIDLE, status = 0 > > dfuIDLE, continuing > > Transfer Size = 0x1000 > > bytes_per_hash=30772 > > Starting download: [##################################################] > > finished! > > state(2) = dfuIDLE, status(0) = No error condition is present > > Done! > > Resetting USB to switch back to runtime mode > > > > After that, execute the following: > > > > ./dfu-util -a rootfs -R -D qtopia-rootfs.2-11270550.jffs2 > > > > which should get you the following, and it should take between 5-10min > > to finish: > > > > dfu-util - (C) 2007 by OpenMoko Inc. > > This program is Free Software and has ABSOLUTELY NO WARRANTY > > > > Opening USB Device 0x0000:0x0000... > > Claiming USB DFU Runtime Interface... > > Determining device status: state = appIDLE, status = 0 > > Device really in Runtime Mode, send DFU detach request... > > Resetting USB... > > Opening USB Device... > > Found Runtime: [0x1457:0x5119] devnum=5, cfg=0, intf=0, alt=5, name="rootfs" > > Claiming USB DFU Interface... > > Setting Alternate Setting ... > > Determining device status: state = dfuIDLE, status = 0 > > dfuIDLE, continuing > > Transfer Size = 0x1000 > > bytes_per_hash=639122 > > Starting download: [##################################################] > > finished! > > state(2) = dfuIDLE, status(0) = No error condition is present > > Done! > > Resetting USB to switch back to runtime mode > > > > In both cases, some text on your Neo should appear, indicating that the > > kernel or the rootfs are being downloaded. > > > > After this, the Neo should be able to boot, and depending on how you > > have your boot menu set up, choose "Boot" or perhaps "Boot from NAND". > > The method described above in any case puts the software on the NAND > > flash, and not on an SD card, if you have that installed. > > > > I hope this was useful, but if not, it was at least a long description :-) > > > > In any case, I hope you and everyone else will have a great Neo Year! > > > > Peter > > > > > > Linda Lind wrote: > > > Thank you Andy! > > > That's what I want to do, but I dont understand how to start. > > > To get the system working on the computer. > > > I dont understand the instruktions in the wiki I need help with the > > > basic teknic to set up the dfu-util to work on my opensuse. > > > //Linda > > > 2007/12/30, andy selby <[EMAIL PROTECTED]>: > > > > > >>> Hi! > > >>> I need some help with my new mobile! > > >>> I dont understand where to start! > > >>> I run openSuse 10.2. > > >>> What am I supposed to install on my PC to get the option to connect to > > >>> my neo? > > >>> Or how do I do to install dfu-util? > > >>> Is there any simpel howto for a newbie? > > >>> Please help me!!!! > > >>> //Linda > > >>> > > >> Go to http://wiki.openmoko.org/wiki/Flashing_openmoko and follow the > > >> instructions there. > > >> If your not a developer, just someone who wants a functional phone I > > >> would advise you to install qtopia on your neo > > >> http://wiki.openmoko.org/wiki/Qtopia_on_Neo1973 > > >> get the tarball from here > > >> http://www.qtopia.net/modules/mydownloads/singlefile.php?lid=50 and > > >> unzip it to get the rootfs and kernel. > > >> > > >> > > >> > > > > > > > > > > > > > > -- > //Ola > -- //Ola
