hi,
your svn version r3801 is too old and i am using r4082 to build
linux-openmoko package. There are two conf files related to svn numbers
for bitbake. You may check this svn number first.
moko/openembedded/conf/distro/include/sane-srcrevs.inc
SRCREV_pn-linux-openmoko ?= "3801"
moko/openembedded/conf/distro/include/moko-autorev.inc
SRCREV_pn-linux-openmoko ?= "${AUTOREV}"
if you include this 'moko-autorev.inc' in your 'local.conf', it should
retrieve the latest svn number like mine. if you don't want to use the
latest version, you can just specify the revision number in
'sane-srcrevs.inc'. For this case, you may change it to 4082, but i
suggest to use ${AUTOREV} from svn server.
also, make sure you update the building environment. try these commands
as below:
# . setup-env
# make update
# bitbake linux-openmoko
if it's OK, then you can try to 'make openmoko-devel-image'.
good luck!
erin
Javi Roman wrote:
On Feb 19, 2008 4:21 PM, Tilman Klar <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
[....]
> Hi everybody,
>
> it seems like there's something wrong with my boxes when using the
> MokoMakefile. I'm running into a fetch error, as soon as the Makefile
> reaches task #836 (ID: 712, linux-openmoko-2.6.24+svnr3801-r3):
>
> ---cut---
> NOTE: fetch
>
http://downloads.openmoko.org/sources/config_svn.openmoko.org_.branches.src.target.kernel.2.6.24.x_3801_.tar.gz
> --04:03:36--
>
http://downloads.openmoko.org/sources/config_svn.openmoko.org_.branches.src.target.kernel.2.6.24.x_3801_.tar.gz
> =>
>
