On Sat, 15 Mar 2008, Andy Powell wrote:
Andy I did try it briefly, using an SD boot from that old file of yours
u-boot-good-for-sd-boot-r13_0_2632_0.bin It seems to have gone from
your site. luckily I kept a copy.
Hmmmm it's still there...
http://buildhost.automated.it/u-boot-good-for-sd-boot-r13_0_2632_0.bin
It didn't occur to me to go to Parent Directory; so thankyou.
but it is old....
you just need to be sure to specify which bit of the nand you are erasing
otherwise it gets ugly fast.
It is dated November, that bug was fixed by early August; I have not
ever erased the boot partition as by the time I started getting serious
it was all over :)
I did of lot of trials with that really old u-boot, with no problems.
THen I tried a FIC one of March 5
u-boot-gta01bv4-1.3.1+git0+10bbb38a402a2faf18858c451bcdc63d45888e6e+svn4164-r3.bin
THe new one the difference is that when it goes to the SD card it
prints the Manufacturer details and then
READ_BL_LEN=14, C_SIZE_MULT-7, C_SIZE=4095
size=0
whereas the older one fills in a big number for size and goes ahead.
Does this happen to anyone else?
thanks
clare
