Thank you Kevin, the reports are very much appreciated. It looks like the stability of the UI after resuming from suspend has been greatly improved with the recent images. I loaded the Apr 17 image, and the kernel image mentioned in this post, as well as the UBoot image on the recommended page (u-boot-gta01bv4-1.3.1+svnr4297+gitb29661fc1151077776454288051bc9a488351ce8-r3.bin) on my GTA01Bv4 device.
After a full-night charge, I set the Power Management to: Dim first, then lock. The device goes to suspend mode after about 5 minutes. The battery lasted for 16 hours on suspend, with about 30 minutes of use (calls, gllin, tangogps). I pushed the Aux button several times, an the UI restored to a fully operational mode in about 3 seconds. Sound feedback no longer worked, however. I also made 3 calls to the phone. 2 of them caused the phone to resume from suspend, and start vibrating. One didn't (this was in the morning after it had been suspended for about 6 hours), so I left a numeric page which I got as soon as I pushed the button to resume from suspend. George On Thu, Apr 17, 2008 at 4:54 PM, Kevin Dean <[EMAIL PROTECTED]> wrote: > Today's full review can be found at > http://wiki.openmoko.org/wiki/Snapshot_review/2008-04-17 and the list > of past reviews at > http://wiki.openmoko.org/wiki/Category:SnapshotReview > > Today's image doesn't show much change, except in one regard. It > appears as if bug #1213 has been corrected. Specifically, this means > that the bluetooth applet and the bluetooth option in the neod panel > both toggle power off and on and relfect each other's changes. > > In short, I recommend today's rootfs > > (http://downloads.openmoko.org/recommended/Openmoko-openmoko-devel-image-glibc-ipk-P1-Snapshot-20080417-om-gta01.rootfs.jffs2) > and the kernel from 03 April 2008 which can be found at > > http://downloads.openmoko.org/recommended/uImage-2.6.24+svnr4301-r4251-r5-om-gta01.bin > > -Kevin Dean > >
