Hello Federico, I was looking into that yesterday, just ordered one of those.
Thanks! On Mon, Sep 12, 2016 at 1:16 PM, Federico Gimenez < [email protected]> wrote: > Hey Omer > > On Sat, Sep 10, 2016 at 12:29 PM, Omer Akram <[email protected]> > wrote: > >> >> My general workflow is: I flash the ubuntu-core on my sdcard and boot the >> Pi without any internet (this creates some initial directories like >> /etc/network). Then I add a network interface for my wifi dongle by >> mounting the sdcard on my laptop and again boot the Pi. This used to get me >> access to the Pi. With latest image my device does get online with my home >> router(dhcp successful) but I cannot ssh as I presume there is no default >> user. >> >> > For the serial console ogra mentioned you can use a usb to ttl serial > cable to connect to the pi2 [1]. Having the pins connected this way [2] > you can interact with it through this command once the usb is connected to > the laptop: > > $ sudo screen /dev/ttyUSB0 115200 > > Then you can configure the network on first boot from console-conf. Please > let me know if you need any further info. Thanks! :) > > [1] https://www.adafruit.com/product/954 > [2] https://www.modmypi.com/image/cache/data/rpi-products/ > gpio/debug/USB-to-TTL-Serial-Cable-Debug-Console-Cable-for- > Raspberry-Pi-1-800x609.jpg >
-- Devices mailing list [email protected] Modify settings or unsubscribe at: https://lists.snapcraft.io/mailman/listinfo/devices
