It adds device tree data parsing support for imx tty/serial driver.

Signed-off-by: Jeremy Kerr <[email protected]>
Signed-off-by: Jason Liu <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
---
 .../bindings/tty/serial/fsl-imx-uart.txt           |   21 +++++
 drivers/tty/serial/imx.c                           |   81 +++++++++++++++++---
 2 files changed, 92 insertions(+), 10 deletions(-)
 create mode 100644 
Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt

diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt 
b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
new file mode 100644
index 0000000..7648e17
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -0,0 +1,21 @@
+* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible : should be "fsl,<soc>-uart", "fsl,imx-uart"
+- reg : address and length of the register set for the device
+- interrupts : should contain uart interrupt
+- id : should be the port ID defined by soc
+
+Optional properties:
+- fsl,has-rts-cts : indicate it has rts-cts
+- fsl,irda-mode : support irda mode
+
+Example:
+
+uart@73fbc000 {
+       compatible = "fsl,imx51-uart", "fsl,imx-uart";
+       reg = <0x73fbc000 0x4000>;
+       interrupts = <31>;
+       id = <1>;
+       fsl,has-rts-cts;
+};
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index a544731..2769353 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -45,6 +45,8 @@
 #include <linux/delay.h>
 #include <linux/rational.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1223,6 +1225,63 @@ static int serial_imx_resume(struct platform_device *dev)
        return 0;
 }
 
+#ifdef CONFIG_OF
+static int serial_imx_probe_dt(struct imx_port *sport,
+               struct platform_device *pdev)
+{
+       struct device_node *node = pdev->dev.of_node;
+       const __be32 *line;
+
+       if (!node)
+               return -ENODEV;
+
+       line = of_get_property(node, "id", NULL);
+       if (!line)
+               return -ENODEV;
+
+       sport->port.line = be32_to_cpup(line) - 1;
+
+       if (of_get_property(node, "fsl,has-rts-cts", NULL))
+               sport->have_rtscts = 1;
+
+       if (of_get_property(node, "fsl,irda-mode", NULL))
+               sport->use_irda = 1;
+
+       return 0;
+}
+
+static struct of_device_id imx_uart_dt_ids[] = {
+       { .compatible = "fsl,imx-uart" },
+       {},
+};
+#else
+static int serial_imx_probe_dt(struct imx_port *sport,
+               struct platform_device *pdev)
+{
+       return -ENODEV;
+}
+#define imx_uart_dt_ids NULL
+#endif
+
+static int serial_imx_probe_pdata(struct imx_port *sport,
+               struct platform_device *pdev)
+{
+       struct imxuart_platform_data *pdata = pdev->dev.platform_data;
+
+       if (!pdata)
+               return 0;
+
+       if (pdata->flags & IMXUART_HAVE_RTSCTS)
+               sport->have_rtscts = 1;
+
+       if (pdata->flags & IMXUART_IRDA)
+               sport->use_irda = 1;
+
+       sport->port.line = pdev->id;
+
+       return 0;
+}
+
 static int serial_imx_probe(struct platform_device *pdev)
 {
        struct imx_port *sport;
@@ -1235,6 +1294,12 @@ static int serial_imx_probe(struct platform_device *pdev)
        if (!sport)
                return -ENOMEM;
 
+       ret = serial_imx_probe_dt(sport, pdev);
+       if (ret == -ENODEV)
+               ret = serial_imx_probe_pdata(sport, pdev);
+       if (ret)
+               goto free;
+
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                ret = -ENODEV;
@@ -1259,7 +1324,6 @@ static int serial_imx_probe(struct platform_device *pdev)
        sport->port.fifosize = 32;
        sport->port.ops = &imx_pops;
        sport->port.flags = UPF_BOOT_AUTOCONF;
-       sport->port.line = pdev->id;
        init_timer(&sport->timer);
        sport->timer.function = imx_timeout;
        sport->timer.data     = (unsigned long)sport;
@@ -1273,17 +1337,13 @@ static int serial_imx_probe(struct platform_device 
*pdev)
 
        sport->port.uartclk = clk_get_rate(sport->clk);
 
-       imx_ports[pdev->id] = sport;
+       if (imx_ports[sport->port.line]) {
+               ret = -EBUSY;
+               goto clkput;
+       }
+       imx_ports[sport->port.line] = sport;
 
        pdata = pdev->dev.platform_data;
-       if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
-               sport->have_rtscts = 1;
-
-#ifdef CONFIG_IRDA
-       if (pdata && (pdata->flags & IMXUART_IRDA))
-               sport->use_irda = 1;
-#endif
-
        if (pdata && pdata->init) {
                ret = pdata->init(pdev);
                if (ret)
@@ -1344,6 +1404,7 @@ static struct platform_driver serial_imx_driver = {
        .driver         = {
                .name   = "imx-uart",
                .owner  = THIS_MODULE,
+               .of_match_table = imx_uart_dt_ids,
        },
 };
 
-- 
1.7.4.1

_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to