Engineering names are more stable than marketing names. Hence, use them for Device Tree compatible properties instead.
Signed-off-by: Stephen Warren <[email protected]> --- Documentation/devicetree/usage-model | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/usage-model b/Documentation/devicetree/usage-model index 03a56b3..45e03b8 100644 --- a/Documentation/devicetree/usage-model +++ b/Documentation/devicetree/usage-model @@ -240,7 +240,7 @@ About now is a good time to lay out an example. Here is part of the device tree for the NVIDIA Tegra board. /{ - compatible = "nvidia,harmony", "nvidia,tegra250"; + compatible = "nvidia,harmony", "nvidia,tegra20"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&intc>; @@ -254,33 +254,33 @@ device tree for the NVIDIA Tegra board. }; soc { - compatible = "nvidia,tegra250-soc", "simple-bus"; + compatible = "nvidia,tegra20-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; intc: interrupt-controller@50041000 { - compatible = "nvidia,tegra250-gic"; + compatible = "nvidia,tegra20-gic"; interrupt-controller; #interrupt-cells = <1>; reg = <0x50041000 0x1000>, < 0x50040100 0x0100 >; }; serial@70006300 { - compatible = "nvidia,tegra250-uart"; + compatible = "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; interrupts = <122>; }; i2s-1: i2s@70002800 { - compatible = "nvidia,tegra250-i2s"; + compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x100>; interrupts = <77>; codec = <&wm8903>; }; i2c@7000c000 { - compatible = "nvidia,tegra250-i2c"; + compatible = "nvidia,tegra20-i2c"; #address-cells = <1>; #size-cells = <1>; reg = <0x7000c000 0x100>; -- 1.7.0.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
