On Sun, Jul 10, 2011 at 01:16:41AM +0800, Shawn Guo wrote:
> It adds device tree probe support for spi-imx driver.
>
> Signed-off-by: Shawn Guo <[email protected]>
> Cc: Grant Likely <[email protected]>
Applied, thanks.
g.
> ---
> .../devicetree/bindings/spi/fsl-imx-cspi.txt | 22 +++++++++++
> drivers/spi/spi-imx.c | 38
> ++++++++++++++++----
> 2 files changed, 53 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
>
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> new file mode 100644
> index 0000000..9841057
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -0,0 +1,22 @@
> +* Freescale (Enhanced) Configurable Serial Peripheral Interface
> + (CSPI/eCSPI) for i.MX
> +
> +Required properties:
> +- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi"
> +- reg : Offset and length of the register set for the device
> +- interrupts : Should contain CSPI/eCSPI interrupt
> +- fsl,spi-num-chipselects : Contains the number of the chipselect
> +- cs-gpios : Specifies the gpio pins to be used for chipselects.
> +
> +Example:
> +
> +ecspi@70010000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx51-ecspi";
> + reg = <0x70010000 0x4000>;
> + interrupts = <36>;
> + fsl,spi-num-chipselects = <2>;
> + cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
> + <&gpio3 25 0>; /* GPIO4_25 */
> +};
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index ad61828..5456bcc 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -34,6 +34,9 @@
> #include <linux/spi/spi.h>
> #include <linux/spi/spi_bitbang.h>
> #include <linux/types.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
>
> #include <mach/spi.h>
>
> @@ -606,6 +609,16 @@ static struct platform_device_id spi_imx_devtype[] = {
> }
> };
>
> +static const struct of_device_id spi_imx_dt_ids[] = {
> + { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
> + { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
> + { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
> + { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
> + { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
> + { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
> + { /* sentinel */ }
> +};
> +
> static void spi_imx_chipselect(struct spi_device *spi, int is_active)
> {
> struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
> @@ -739,19 +752,25 @@ static void spi_imx_cleanup(struct spi_device *spi)
>
> static int __devinit spi_imx_probe(struct platform_device *pdev)
> {
> - struct spi_imx_master *mxc_platform_info;
> + struct device_node *np = pdev->dev.of_node;
> + const struct of_device_id *of_id =
> + of_match_device(spi_imx_dt_ids, &pdev->dev);
> + struct spi_imx_master *mxc_platform_info =
> + dev_get_platdata(&pdev->dev);
> struct spi_master *master;
> struct spi_imx_data *spi_imx;
> struct resource *res;
> int i, ret, num_cs;
>
> - mxc_platform_info = dev_get_platdata(&pdev->dev);
> - if (!mxc_platform_info) {
> + if (!np && !mxc_platform_info) {
> dev_err(&pdev->dev, "can't get the platform data\n");
> return -EINVAL;
> }
>
> - num_cs = mxc_platform_info->num_chipselect;
> + ret = of_property_read_u32(np, "fsl,spi-num-chipselects", &num_cs);
> + if (ret < 0)
> + num_cs = mxc_platform_info->num_chipselect;
> +
> master = spi_alloc_master(&pdev->dev,
> sizeof(struct spi_imx_data) + sizeof(int) * num_cs);
> if (!master)
> @@ -766,9 +785,12 @@ static int __devinit spi_imx_probe(struct
> platform_device *pdev)
> spi_imx->bitbang.master = spi_master_get(master);
>
> for (i = 0; i < master->num_chipselect; i++) {
> - spi_imx->chipselect[i] = mxc_platform_info->chipselect[i];
> - if (spi_imx->chipselect[i] < 0)
> + int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
> + if (cs_gpio < 0)
> + cs_gpio = mxc_platform_info->chipselect[i];
> + if (cs_gpio < 0)
> continue;
> + spi_imx->chipselect[i] = cs_gpio;
> ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
> if (ret) {
> while (i > 0) {
> @@ -790,7 +812,7 @@ static int __devinit spi_imx_probe(struct platform_device
> *pdev)
>
> init_completion(&spi_imx->xfer_done);
>
> - spi_imx->devtype_data =
> + spi_imx->devtype_data = of_id ? of_id->data :
> (struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -838,6 +860,7 @@ static int __devinit spi_imx_probe(struct platform_device
> *pdev)
>
> spi_imx->devtype_data->intctrl(spi_imx, 0);
>
> + master->dev.of_node = pdev->dev.of_node;
> ret = spi_bitbang_start(&spi_imx->bitbang);
> if (ret) {
> dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
> @@ -900,6 +923,7 @@ static struct platform_driver spi_imx_driver = {
> .driver = {
> .name = DRIVER_NAME,
> .owner = THIS_MODULE,
> + .of_match_table = spi_imx_dt_ids,
> },
> .id_table = spi_imx_devtype,
> .probe = spi_imx_probe,
> --
> 1.7.4.1
>
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
