On Fri, Jul 22, 2011 at 03:48:37PM +0530, Thomas Abraham wrote:
> Add device tree probe support for Samsung's s3c2410 i2c driver.
>
> Signed-off-by: Thomas Abraham <[email protected]>
> ---
> .../devicetree/bindings/i2c/samsung-i2c.txt | 44 +++++++++++++++++
> drivers/i2c/busses/i2c-s3c2410.c | 51
> +++++++++++++++++++-
> 2 files changed, 94 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/samsung-i2c.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> new file mode 100644
> index 0000000..4e1a2ef
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> @@ -0,0 +1,44 @@
> +* Samsung's I2C controller
> +
> +The Samsung's I2C controller is used to interface with I2C devices.
> +
> +Required properties:
> + - compatible: value should be either of the following.
> + (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
> + (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
> +
> + - reg: physical base address of the controller and length of memory mapped
> + region.
> +
> + - interrupts: interrupt number to the cpu.
> +
> + - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
> +
> + - gpios: The order of the gpios should be in the following order.
> + <SDA, SCL>
> +
> +Optional properties:
> + - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
> + specified, default value is 0.
> +
> + - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
> + specified, the default value in Hz is 100000.
> +
> +Example:
> +
> + i2c@13870000 {
> + compatible = "samsung,s3c2440-i2c";
> + reg = <0x13870000 0x100>;
> + interrupts = <345>;
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <100000>;
> + gpios = <&gpd1 2 0 /* SDA */
> + &gpd1 3 0 /* SCL */>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + wm8994@1a {
> + compatible = "wlf,wm8994";
> + reg = <0x1a>;
> + };
> + };
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c
> b/drivers/i2c/busses/i2c-s3c2410.c
> index e132168..40264b0 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -35,6 +35,7 @@
> #include <linux/cpufreq.h>
> #include <linux/slab.h>
> #include <linux/io.h>
> +#include <linux/of_i2c.h>
>
> #include <asm/irq.h>
>
> @@ -96,6 +97,10 @@ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c
> *i2c)
> struct platform_device *pdev = to_platform_device(i2c->dev);
> enum s3c24xx_i2c_type type;
>
> + if (i2c->dev->of_node)
> + return of_device_is_compatible(i2c->dev->of_node,
> + "samsung,s3c2440-i2c");
> +
> type = platform_get_device_id(pdev)->driver_data;
> return type == TYPE_S3C2440;
> }
> @@ -787,6 +792,34 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
> return 0;
> }
>
> +#ifdef CONFIG_OF
> +
> +/* s3c24xx_i2c_parse_dt
> + *
> + * Parse the device tree node and retreive the platform data.
> +*/
> +
> +static void
> +s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
> +{
> + struct s3c2410_platform_i2c *pdata = &i2c->pdata;
> +
> + if (!np)
> + return;
> +
> + of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
> + of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
> + of_property_read_u32(np, "samsung,i2c-max-bus-freq",
> + (u32 *)&pdata->frequency);
> +}
> +#else
> +static void
> +s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
> +{
> + return;
> +}
> +#endif
> +
> /* s3c24xx_i2c_probe
> *
> * called by the bus driver when a suitable device is found
> @@ -812,6 +845,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
> }
>
> memcpy(&i2c->pdata, pdata, sizeof(*pdata));
> + s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
>
> strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
> i2c->adap.owner = THIS_MODULE;
> @@ -908,13 +942,16 @@ static int s3c24xx_i2c_probe(struct platform_device
> *pdev)
> */
>
> i2c->adap.nr = pdata->bus_num;
> + i2c->adap.dev.of_node = pdev->dev.of_node;
>
> - ret = i2c_add_numbered_adapter(&i2c->adap);
> + ret = (pdev->dev.of_node) ? i2c_add_adapter(&i2c->adap) :
> + i2c_add_numbered_adapter(&i2c->adap);
i2c_add_numbered_adapter will do the right thing now if i2c->adap.nr
is set to -1 when a bus number needs to be dynamically allocated. You can
simplify this.
> if (ret < 0) {
> dev_err(&pdev->dev, "failed to add bus to i2c core\n");
> goto err_cpufreq;
> }
>
> + of_i2c_register_devices(&i2c->adap);
> platform_set_drvdata(pdev, i2c);
>
> dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
> @@ -1016,6 +1053,17 @@ static struct platform_device_id s3c24xx_driver_ids[]
> = {
> };
> MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id s3c24xx_i2c_match[] = {
> + { .compatible = "samsung,s3c2410-i2c" },
> + { .compatible = "samsung,s3c2440-i2c" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
> +#else
> +#define s3c24xx_i2c_match NULL
> +#endif
> +
> static struct platform_driver s3c24xx_i2c_driver = {
> .probe = s3c24xx_i2c_probe,
> .remove = s3c24xx_i2c_remove,
> @@ -1024,6 +1072,7 @@ static struct platform_driver s3c24xx_i2c_driver = {
> .owner = THIS_MODULE,
> .name = "s3c-i2c",
> .pm = S3C24XX_DEV_PM_OPS,
> + .of_match_table = s3c24xx_i2c_match,
> },
Looks pretty good. After fixing the above comment, feel free to add
my:
Acked-by: Grant Likely <[email protected]>
> };
>
> --
> 1.6.6.rc2
>
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
