Add the twl6030 node inside the i2c1 controller node. Add the RTC submodule inside the twl node.
This is just the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Signed-off-by: Benoit Cousson <[email protected]> Cc: Grant Likely <[email protected]> --- arch/arm/boot/dts/omap4-sdp.dts | 25 +++++++++++++++++++++++-- 1 files changed, 23 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index ed85b35..d03f2e7 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -26,12 +26,33 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; - - }; &i2c1 { clock-frequency = <400000>; + + /* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/twl6030.pdf + */ + twl@48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + /* twl is a MFD, so it will contain a bunch of sub-ips */ + #address-cells = <1>; + #size-cells = <0>; + ranges = <0 0x48>; + + twl_rtc { + compatible = "ti,twl_rtc"; + interrupts = <11>; + reg = <0>; + }; + }; }; &i2c2 { -- 1.7.0.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
