> -----Original Message-----
> From: Thomas Abraham [mailto:[email protected]]
> Sent: Thursday, September 01, 2011 6:05 PM
> To: [email protected]
> Cc: [email protected]; [email protected];
linux-samsung-
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]
> Subject: [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance
to
> non-dt build
> 
> The pl330 device instances and associated platform data is required only
> for non-device-tree builds. With device tree, all of this information is
> obtained from the device tree.
> 
> Signed-off-by: Thomas Abraham <[email protected]>
> ---
>  arch/arm/mach-exynos4/Kconfig  |    7 +++++++
>  arch/arm/mach-exynos4/Makefile |    3 ++-
>  2 files changed, 9 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index d4d401c..3edbf37 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -21,6 +21,13 @@ config EXYNOS4_MCT
>       help
>         Use MCT (Multi Core Timer) as kernel timers
> 
> +config EXYNOS4_DEV_DMA
> +     bool
> +     default y if !OF
> +     help
> +       Compile in amba device definitions for DMA controller if OF
> +       is not enabled.
> +
>  config EXYNOS4_DEV_AHCI
>       bool
>       help
> diff --git a/arch/arm/mach-exynos4/Makefile
b/arch/arm/mach-exynos4/Makefile
> index d2bf5bf..a2f33dc 100644
> --- a/arch/arm/mach-exynos4/Makefile
> +++ b/arch/arm/mach-exynos4/Makefile
> @@ -13,7 +13,8 @@ obj-                                :=
>  # Core support for EXYNOS4 system
> 
>  obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
> -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
> pmu.o
> +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o pmu.o
> +obj-$(CONFIG_EXYNOS4_DEV_DMA)        += dma.o

Do we need _really_ EXYNOS4_DEV_DMA here?
How about to use like following?

+obj-$(!CONFIG_OF)              += dma.o

If any problems, let me know.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.


>  obj-$(CONFIG_PM)             += pm.o sleep.o
>  obj-$(CONFIG_CPU_IDLE)               += cpuidle.o
> 
> --
> 1.6.6.rc2

_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to