On Mon, Oct 10, 2011 at 09:49:36PM +0530, Rajendra Nayak wrote: > +- regulator-change-voltage: boolean, Output voltage can be changed by > software > +- regulator-change-current: boolean, Output current can be chnaged by > software > +- regulator-change-mode: boolean, Operating mode can be changed by software > +- regulator-change-status: boolean, Enable/Disable control for regulator > exists > +- regulator-change-drms: boolean, Dynamic regulator mode switching is enabled > +- regulator-mode-fast: boolean, allow/set fast mode for the regulator > +- regulator-mode-normal: boolean, allow/set normal mode for the regulator > +- regulator-mode-idle: boolean, allow/set idle mode for the regulator > +- regulator-mode-standby: boolean, allow/set standby mode for the regulator > +- regulator-input-uV: Input voltage for regulator when supplied by another > regulator > +- regulator-always-on: boolean, regulator should never be disabled
Thinking about this I'm not sure that these should go in the device tree, they're as much talking about what Linux is able to cope with as they are talking about what the hardware is able to do. Sometimes they'll be fixed by the design but they are sometimes also restricted by what the software is currently capable of. DRMS is a prime example here, it depends on how good we are at telling the API about how much current we're using. _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss
