allow the DT to pass the mac address and the phy mode
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc: Jamie Iles <[email protected]>
Cc: Nicolas Ferre <[email protected]>
---
Documentation/devicetree/bindings/net/macb.txt | 22 ++++++++
drivers/net/ethernet/cadence/macb.c | 65 +++++++++++++++++++++---
drivers/net/ethernet/cadence/macb.h | 2 +
3 files changed, 81 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/macb.txt
diff --git a/Documentation/devicetree/bindings/net/macb.txt
b/Documentation/devicetree/bindings/net/macb.txt
new file mode 100644
index 0000000..2b727ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -0,0 +1,22 @@
+* Cadence EMACB
+
+Implemeted on Atmel AT91 & AVR32 SoC
+
+Required properties:
+- compatible : Should be "atmel,macb" for Atmel
+- reg : Address and length of the register set for the device
+- interrupts : Should contain macb interrupt
+- phy-mode : String, operation mode of the PHY interface.
+ Supported values are: "mii", "rmii",
+
+Optional properties:
+- local-mac-address : 6 bytes, mac address
+
+Examples:
+
+ macb0: macb@fffc4000 {
+ compatible = "atmel,macb";
+ reg = <oxfffc4000 0x4000>;
+ interrupts = <21>;
+ phy-mode = "mii";
+ };
diff --git a/drivers/net/ethernet/cadence/macb.c
b/drivers/net/ethernet/cadence/macb.c
index a437b46..2c345bc 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -20,6 +20,9 @@
#include <linux/etherdevice.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
#include <linux/phy.h>
#include <mach/board.h>
@@ -81,6 +84,20 @@ static void __init macb_get_hwaddr(struct macb *bp)
addr[4] = top & 0xff;
addr[5] = (top >> 8) & 0xff;
+#ifdef CONFIG_OF
+ /*
+ * 2) from device tree data
+ */
+ if (!is_valid_ether_addr(addr)) {
+ struct device_node *np = bp->pdev->dev.of_node;
+ if (np) {
+ const char *mac = of_get_mac_address(np);
+ if (mac)
+ memcpy(addr, mac, sizeof(addr));
+ }
+ }
+#endif
+
if (is_valid_ether_addr(addr)) {
memcpy(bp->dev->dev_addr, addr, sizeof(addr));
} else {
@@ -191,7 +208,6 @@ static int macb_mii_probe(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev;
- struct eth_platform_data *pdata;
int ret;
phydev = phy_find_first(bp->mii_bus);
@@ -200,14 +216,11 @@ static int macb_mii_probe(struct net_device *dev)
return -1;
}
- pdata = bp->pdev->dev.platform_data;
/* TODO : add pin_irq */
/* attach the mac to the phy */
ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0,
- pdata && pdata->is_rmii ?
- PHY_INTERFACE_MODE_RMII :
- PHY_INTERFACE_MODE_MII);
+ bp->phy_interface);
if (ret) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
return ret;
@@ -1117,6 +1130,30 @@ static const struct net_device_ops macb_netdev_ops = {
#endif
};
+#if defined(CONFIG_OF)
+static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "atmel,macb" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, macb_dt_ids);
+
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ if (np)
+ return of_get_phy_mode(np);
+
+ return -ENODEV;
+}
+#else
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+#endif
+
static int __init macb_probe(struct platform_device *pdev)
{
struct eth_platform_data *pdata;
@@ -1210,20 +1247,31 @@ static int __init macb_probe(struct platform_device
*pdev)
macb_writel(bp, NCFGR, config);
macb_get_hwaddr(bp);
- pdata = pdev->dev.platform_data;
- if (pdata && pdata->is_rmii)
+ err = macb_get_phy_mode_dt(pdev);
+ if (err < 0) {
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->is_rmii)
+ bp->phy_interface = PHY_INTERFACE_MODE_RMII;
+ else
+ bp->phy_interface = PHY_INTERFACE_MODE_MII;
+ } else {
+ bp->phy_interface = err;
+ }
+
+ if (bp->phy_interface == PHY_INTERFACE_MODE_RMII) {
#if defined(CONFIG_ARCH_AT91)
macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
#else
macb_writel(bp, USRIO, 0);
#endif
- else
+ } else {
#if defined(CONFIG_ARCH_AT91)
macb_writel(bp, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(bp, USRIO, MACB_BIT(MII));
#endif
+ }
bp->tx_pending = DEF_TX_RING_PENDING;
@@ -1344,6 +1392,7 @@ static struct platform_driver macb_driver = {
.driver = {
.name = "macb",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(macb_dt_ids),
},
};
diff --git a/drivers/net/ethernet/cadence/macb.h
b/drivers/net/ethernet/cadence/macb.h
index d3212f6..8342744 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -389,6 +389,8 @@ struct macb {
unsigned int link;
unsigned int speed;
unsigned int duplex;
+
+ phy_interface_t phy_interface;
};
#endif /* _MACB_H */
--
1.7.7
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
