Signed-off-by: Jochen Friedrich <[email protected]> --- .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/sa1110.dtsi | 72 ++++++++++++++++++++ arch/arm/boot/dts/simpad.dts | 49 +++++++++++++ arch/arm/mach-sa1100/Kconfig | 13 ++++ arch/arm/mach-sa1100/Makefile.boot | 1 + arch/arm/mach-sa1100/simpad.c | 29 ++++++++- 6 files changed, 164 insertions(+), 1 deletions(-) create mode 100644 arch/arm/boot/dts/sa1110.dtsi create mode 100644 arch/arm/boot/dts/simpad.dts
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 5b14518..cbe7046 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -34,6 +34,7 @@ qcom Qualcomm, Inc. ramtron Ramtron International samsung Samsung Semiconductor schindler Schindler +siemens SIEMENS simtek sirf SiRF Technology, Inc. stericsson ST-Ericsson diff --git a/arch/arm/boot/dts/sa1110.dtsi b/arch/arm/boot/dts/sa1110.dtsi new file mode 100644 index 0000000..e1ca379 --- /dev/null +++ b/arch/arm/boot/dts/sa1110.dtsi @@ -0,0 +1,72 @@ +/* + * sa1110.dtsi - Device Tree Include file for Intel SA1110 SoC + * + * Copyright (C) 2011 Jochen Friedrich <[email protected]> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Intel SA1110 SoC"; + compatible = "intel,sa1110"; + interrupt-parent = <&aic>; + + cpus { + cpu@0 { + compatible = "intel,sa1110"; + }; + }; + + localbus { + compatible = "intel,sa1110-localbus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = < + 0x0 0x0 0x00000000 0x08000000 + 0x1 0x0 0x08000000 0x08000000 + 0x2 0x0 0x10000000 0x08000000 + 0x3 0x0 0x18000000 0x08000000 + 0x4 0x0 0x40000000 0x08000000 + 0x5 0x0 0x48000000 0x08000000 + >; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@0x80010000 { + compatible = "intel,sa1100-uart"; + reg = <0x80010000 0x24>; + interrupts = <15>; + status = "disabled"; + }; + + uart1: serial@0x80030000 { + compatible = "intel,sa1100-uart"; + reg = <0x80030000 0x24>; + interrupts = <16>; + status = "disabled"; + }; + + uart2: serial@0x80050000 { + compatible = "intel,sa1100-uart"; + reg = <0x80050000 0x24>; + interrupts = <17>; + status = "disabled"; + }; + + aic: interrupt-controller@0x90050000 { + compatible = "intel,sa1110-icr"; + reg = <0x90050000 0x24>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent; + }; + }; +}; diff --git a/arch/arm/boot/dts/simpad.dts b/arch/arm/boot/dts/simpad.dts new file mode 100644 index 0000000..fdd7969 --- /dev/null +++ b/arch/arm/boot/dts/simpad.dts @@ -0,0 +1,49 @@ +/dts-v1/; +/include/ "sa1110.dtsi" + +/ { + model = "SIEMENS, SIMpad"; + compatible = "siemens,simpad"; + + aliases { + serial0 = &uart2; + serial1 = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; + + chosen { + bootargs = "console=ttySA0"; + }; + + localbus { + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + }; + + flash@1,0 { + compatible = "cfi-flash"; + reg = <1 0 0x08000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + + soc { + uart0: serial@0x80010000 { + status = "okay"; + }; + + uart2: serial@0x80050000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 42625e4..31238c3 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -157,6 +157,19 @@ config SA1100_SIMPAD like CL4 in additional it has a PCMCIA-Slot. For more information visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. +config SA1100_SIMPAD_DT + bool "Simpad with device tree support" + select CPU_FREQ_SA1110 + select SA1100_SIMPAD + select USE_OF + help + The SIEMENS webpad SIMpad is based on the StrongARM 1110. There + are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB + FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a + PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same + like CL4 in additional it has a PCMCIA-Slot. For more information + visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. + config SA1100_SSP tristate "Generic PIO SSP" help diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6..1d17767 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -6,3 +6,4 @@ endif params_phys-y := 0xc0000100 initrd_phys-y := 0xc0800000 +dtb-$(CONFIG_SA1100_SIMPAD_DT) += simpad.dtb diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index d3c9d2b..9d6f663 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -10,6 +10,7 @@ #include <linux/string.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> @@ -211,8 +212,9 @@ static void __init simpad_map_io(void) sa1100_register_uart_fns(&simpad_port_fns); sa1100_register_uart(0, 3); /* serial interface */ +#ifndef CONFIG_OF sa1100_register_uart(1, 1); /* DECT */ - +#endif // Reassign UART 1 pins GAFR |= GPIO_UART_TXD | GPIO_UART_RXD; GPDR |= GPIO_UART_TXD | GPIO_LDD13 | GPIO_LDD15; @@ -392,6 +394,31 @@ static int __init simpad_init(void) arch_initcall(simpad_init); +#ifdef CONFIG_OF +const struct of_device_id simpad_bus_match_table[] = { + { .compatible = "simple-bus", }, + { .compatible = "intel,sa1110-localbus", }, + {} /* Empty terminated list */ +}; + +static void __init simpad_dt_device_init(void) +{ + of_platform_populate(NULL, simpad_bus_match_table, NULL, NULL); +} + +static const char *simpad_dt_board_compat[] __initdata = { + "siemens,simpad", + NULL +}; + +DT_MACHINE_START(simpad_dt, "SIMpad") + .timer = &sa1100_timer, + .map_io = simpad_map_io, + .init_irq = sa1100_init_irq, + .init_machine = simpad_dt_device_init, + .dt_compat = simpad_dt_board_compat, +MACHINE_END +#endif MACHINE_START(SIMPAD, "Simpad") /* Maintainer: Holger Freyther */ -- 1.7.7.3 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
