Add the Cadence macb ethernet controller in at91sam9g45 .dtsi and enable it in at91sam9m10g45ek board device tree file.
Signed-off-by: Nicolas Ferre <[email protected]> --- v3: - form a thread with "macb DT support" patch - remove "local-mac-address" from 9m10g45ek.dts file but use it in documentation example. Documentation/devicetree/bindings/net/macb.txt | 1 + arch/arm/boot/dts/at91sam9g45.dtsi | 7 +++++++ arch/arm/boot/dts/at91sam9m10g45ek.dts | 5 +++++ 3 files changed, 13 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 2e24f05..44afa0e 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -21,4 +21,5 @@ Examples: reg = <0xfffc4000 0x4000>; interrupts = <21>; phy-mode = "rmii"; + local-mac-address = [3a 0e 03 04 05 06]; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index e89b1d7..67f94d3 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -101,6 +101,13 @@ atmel,use-dma-tx; status = "disabled"; }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xfffbc000 0x100>; + interrupts = <25 4>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 85b34f5..a387e77 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -30,6 +30,11 @@ usart1: serial@fff90000 { status = "okay"; }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; }; }; }; -- 1.7.5.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
