Hi Heiko, > >> This driver provides read/write access to the U-Boot bootcounter > >> through PROC FS and/or sysFS file. > > > > Why ProcFS? Why ProcFS and/or SysFS? Which has priority? Why not /dev? > > I drop the ProcFS support for v2.
Don't bother. This approach starts from the wrong side.
>
> >> The bootcountregister gets configured via DTS.
> >> for example on the enbw_cmc board:
> >>
> >> bootcount@0x23060 {
> >> compatible = "uboot,bootcount";
> >
> > No. I assume you are not the vendor of what is at 0x23060, the actual
> > device.
> > Only the device must be encoded in the compatible-entry which then implies
> > the
> > bootcount functionality. Also, keep in mind that your solution should be
> > generic for bootloaders.
>
> So I should call it compatible = "generic, bootcount" ?
Nope, you should give it the name of the device. Remember that 'compatible' is
no 1:1 replacement for platform_driver-binding. Check
http://devicetree.org/Device_Tree_Usage, especially the sections about the
compatible-property.
bootcount itself is not a device. It is a feature of certain devices. And that
needs to be implemented; possibly generic enough that it can work for register
based, i2c based, and so forth, accesses.
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
signature.asc
Description: Digital signature
_______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
