On 02/06/2012 11:29 AM, Tobias Klauser wrote: > The gpios property is described in Documentation/devicetree/gpio.txt, so > reference this document. > > Signed-off-by: Tobias Klauser <[email protected]>
Applied. Rob > --- > Documentation/devicetree/bindings/gpio/led.txt | 6 +++--- > 1 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/gpio/led.txt > b/Documentation/devicetree/bindings/gpio/led.txt > index 141087c..fd2bd56 100644 > --- a/Documentation/devicetree/bindings/gpio/led.txt > +++ b/Documentation/devicetree/bindings/gpio/led.txt > @@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds > device. Each > node's name represents the name of the corresponding LED. > > LED sub-node properties: > -- gpios : Should specify the LED's GPIO, see "Specifying GPIO information > - for devices" in Documentation/devicetree/booting-without-of.txt. Active > - low LEDs should be indicated using flags in the GPIO specifier. > +- gpios : Should specify the LED's GPIO, see "gpios property" in > + Documentation/devicetree/gpio.txt. Active low LEDs should be > + indicated using flags in the GPIO specifier. > - label : (optional) The label for this LED. If omitted, the label is > taken from the node name (excluding the unit address). > - linux,default-trigger : (optional) This parameter, if present, is a _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
