On Mon, Feb 27, 2012 at 04:29:37PM +0000, Arnd Bergmann wrote: > On Monday 27 February 2012, Jason Cooper wrote: > > This patch series provides initial support for devicetree on kirkwood for > > the > > dreamplug platform. After discussing the approach with Arnd Bergman last > > week > > at ELC, we decided to take an incremental approach to the conversion. > > First, I > > would detect that we were on the dreamplug via the devicetree blob. Then, > > configure uart0 via devicetree. We chose the uart since it is already well > > supported under devicetree. > > > > This patch series has been boot-tested on the dreamplug. > > > > In a future patch series, I plan to migrate spi/flash/partitions over to > > devicetree. > > > > When the migration is complete, board-dt.c will not be specific to the > > dreamplug, and dts files can be written for all of the other kirkwood > > boards. > > > > Jason Cooper (2): > > arm: kirkwood: add dreamplug (fdt) support. > > arm: kirkwood: convert uart0 to devicetree. > > Applied to the kirkwood/board branch and pulled into next/boards. > > Great work!
Well, that was easier than I thought. Thanks. > I've made two trivial manual changes, please do these yourself next time: > > 1. Subject should start with "ARM: kirkwood:", not "arm: kirkwood:" by > convention. Sorry, will do. > 2. Nico and I had both replied with "Acked-by:". When you get one of > these replies, add that line under your "Signed-off-by:" line. Ahh, I always wondered how those made the transition. Will add that to my process. > If you have more changes for dreamplug, please submit those on top of > these patches now. Okay, SPI coming up next. thx, Jason. _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
