For now on use i2c-gpio driver on the same pin as the hardware IP.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: [email protected]
---
arch/arm/boot/dts/at91sam9g20.dtsi | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi
b/arch/arm/boot/dts/at91sam9g20.dtsi
index 9e5f933..cfc5e63 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -188,6 +188,18 @@
status = "disabled";
};
+ i2c-gpio@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 0 /* sda */
+ &pioA 24 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ udelay = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
};
--
1.7.7
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
