Hello, I'm working on adding the device tree support for two devices that share some IO registers. Exactly, there is one shared SFR that contains a common bit to enable two PHY devices, and another two bits, each to separately reset each PHY.
Currently this shared register is statically memory mapped and it is handled by a platform specific callback, that both drivers use to control their corresponding (sub)devices in synchronised manner. The two devices are a MIPI-CSI2 receiver and a MIPI-DSI transmitter, and the common register is there to control the camera and the display port PHY. The hardware design is a bit unfortunate, but there is not much I could do about it. The callback can be looked at at: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=arch/arm/plat-s5p/setup-mipiphy.c I have been trying to find method to handle this on a dt platform. Has anyone faced similar issue before ? I would appreciate any ideas or suggestions. One of ideas was to create some sort of PHY framework, similar to clock API, and perhaps handle such platform quirks outside DT. -- Thanks, Sylwester _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
