SPEAr SMI controller version is same for all SPEAr machines. Thus we don't need per machine compatible property in driver.
Thus this patch updates compatible entry to: "st,spear-smi", so that it works for all SPEAr machines. Signed-off-by: Viresh Kumar <[email protected]> --- .../devicetree/bindings/mtd/spear_smi.txt | 4 ++-- drivers/mtd/devices/spear_smi.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt index 7248aad..80dfd96 100644 --- a/Documentation/devicetree/bindings/mtd/spear_smi.txt +++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt @@ -1,7 +1,7 @@ * SPEAr SMI Required properties: -- compatible : "st,spear600-smi" +- compatible : "st,spear-smi" - reg : Address range of the mtd chip - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions. @@ -16,7 +16,7 @@ Optional properties: Example: smi: flash@fc000000 { - compatible = "st,spear600-smi"; + compatible = "st,spear-smi"; #address-cells = <1>; #size-cells = <1>; reg = <0xfc000000 0x1000>; diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index bebce11..f392594 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -1113,7 +1113,7 @@ int spear_smi_resume(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id spear_smi_id_table[] = { - { .compatible = "st,spear600-smi" }, + { .compatible = "st,spear-smi" }, {} }; MODULE_DEVICE_TABLE(of, spear_smi_id_table); -- 1.7.8.110.g4cb5d _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
