SPEAr platforms now support DT and so must convert all drivers support DT. This
patch adds DT probing support for rtc and updates its documentation too.

Signed-off-by: Viresh Kumar <viresh.ku...@st.com>
---
 Documentation/devicetree/bindings/rtc/spear-rtc.txt |   18 ++++++++++++++++++
 drivers/rtc/rtc-spear.c                             |   10 ++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/spear-rtc.txt

diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt 
b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
new file mode 100644
index 0000000..928410f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
@@ -0,0 +1,18 @@
+* SPEAr RTC
+
+Required properties:
+- compatible : "st,spear-rtc"
+- reg : Address range of the rtc registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the rtc interrupt number
+
+Example:
+
+       rtc@fc000000 {
+               compatible = "st,spear-rtc";
+               reg = <0xfc000000 0x1000>;
+               interrupt-parent = <&vic1>;
+               interrupts = <12>;
+       };
+
diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c
index e38da0d..4a12fe5 100644
--- a/drivers/rtc/rtc-spear.c
+++ b/drivers/rtc/rtc-spear.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
@@ -519,6 +520,14 @@ static void spear_rtc_shutdown(struct platform_device 
*pdev)
        clk_disable(config->clk);
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id spear_rtc_id_table[] = {
+       { .compatible = "st,spear-rtc" },
+       {}
+};
+MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
+#endif
+
 static struct platform_driver spear_rtc_driver = {
        .probe = spear_rtc_probe,
        .remove = __devexit_p(spear_rtc_remove),
@@ -527,6 +536,7 @@ static struct platform_driver spear_rtc_driver = {
        .shutdown = spear_rtc_shutdown,
        .driver = {
                .name = "rtc-spear",
+               .of_match_table = of_match_ptr(spear_rtc_id_table),
        },
 };
 
-- 
1.7.10.rc2.10.gb47606

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to