On Mon, 26 Mar 2012, Scott Wood wrote:

On 03/26/2012 11:20 AM, Jason Cooper wrote:
On Mon, Mar 26, 2012 at 10:53:29AM -0500, Scott Wood wrote:
On 03/24/2012 08:14 AM, Jamie Lentin wrote:
Use devicetree to define NAND partitions. Use D-link partition scheme by
default, to be vaguely compatible with their userland.

Signed-off-by: Jamie Lentin <[email protected]>
---
 arch/arm/boot/dts/kirkwood-dns320.dts |   35 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/kirkwood-dns325.dts |   35 +++++++++++++++++++++++++++++++++
 arch/arm/mach-kirkwood/board-dnskw.c  |   31 -----------------------------
 3 files changed, 70 insertions(+), 31 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts 
b/arch/arm/boot/dts/kirkwood-dns320.dts
index 58de7f2..fbf55ff 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -25,5 +25,40 @@
                        clock-frequency = <166666667>;
                        status = "ok";
                };
+
+               nand@3000000 {
+                       status = "ok";
+

This should be "okay", not "ok" -- see IEEE1275.  Or just leave it out.

Ack, but it needs to be there.  Most, but not all, kirkwood boards have
nand, so we define it in kirkwood.dtsi and set it as disabled.
Individual boards can then enable it as needed.

As for 'okay', looks like we may need to patch of_device_is_available()
in drivers/of/base.c (~284) if we want to be consistent with IEEE1275.

No need to change of_device_is_available() -- it handles the
standards-compliant "okay" as well as "ok" which is non-compliant but
probably exists in some broken real OF trees (and even if not, it's bad
to break compatibility with older device trees without a good reason).

Maybe add a comment indicating which should be used.

I need to re-jig this part anyway, so will update to "okay" too---looks like a fairly harmless change.

Would it make sense to change drivers/of/base.c to emit a warning if "ok" is used? Or are there already too many devicetrees in the wild that use "ok"?


-Scott



--
Jamie Lentin
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to