From: Dong Aisheng <[email protected]>

---
This patch is used for test the new pinctrl driver.

Signed-off-by: Dong Aisheng <[email protected]>
---
 arch/arm/boot/dts/imx6q-arm2.dts   |    4 +++
 arch/arm/boot/dts/imx6q.dtsi       |   40 ++++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-esdhc-imx.c |   12 ++++++++++
 3 files changed, 56 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index ce1c823..ee2ee98 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -44,10 +44,14 @@
                                fsl,card-wired;
                                vmmc-supply = <&reg_3p3v>;
                                status = "okay";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usdhc4_1>;
                        };
 
                        uart4: uart@021f0000 {
                                status = "okay";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_uart4_1>;
                        };
                };
        };
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 4905f51..5f3505c 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -386,7 +386,47 @@
                        };
 
                        iomuxc@020e0000 {
+                               compatible = "fsl,imx6q-iomuxc";
                                reg = <0x020e0000 0x4000>;
+
+                               /* shared pinctrl settings */
+                               uart4 {
+                                       pinctrl_uart4_1: uart4grp-1 {
+                                               fsl,pins =      
"MX6Q_PAD_KEY_COL0",
+                                                               
"MX6Q_PAD_KEY_ROW0";
+                                               fsl,mux = <4 4>;
+                                               fsl,pull = <2>;
+                                               fsl,pue = <1>;
+                                               fsl,pke = <1>;
+                                               fsl,speed = <2>;
+                                               fsl,drive-strength = <6>;
+                                               fsl,slew-rate = <1>;
+                                               fsl,hysteresis = <1>;
+                                       };
+                               };
+
+                               usdhc4 {
+                                       pinctrl_usdhc4_1: usdhc4grp-1 {
+                                               fsl,pins =      
"MX6Q_PAD_SD4_CMD",
+                                                               
"MX6Q_PAD_SD4_CLK",
+                                                               
"MX6Q_PAD_SD4_DAT0",
+                                                               
"MX6Q_PAD_SD4_DAT1",
+                                                               
"MX6Q_PAD_SD4_DAT2",
+                                                               
"MX6Q_PAD_SD4_DAT3",
+                                                               
"MX6Q_PAD_SD4_DAT4",
+                                                               
"MX6Q_PAD_SD4_DAT5",
+                                                               
"MX6Q_PAD_SD4_DAT6",
+                                                               
"MX6Q_PAD_SD4_DAT7";
+                                               fsl,mux = <0 0 1 1 1 1 1 1 1 1>;
+                                               fsl,pull = <1>;
+                                               fsl,pue = <1>;
+                                               fsl,pke = <1>;
+                                               fsl,speed = <1>;
+                                               fsl,drive-strength = <3>;
+                                               fsl,slew-rate = <1>;
+                                               fsl,hysteresis = <1>;
+                                       };
+                               };
                        };
 
                        dcic@020e4000 { /* DCIC1 */
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c 
b/drivers/mmc/host/sdhci-esdhc-imx.c
index 6193a0d..84ef749 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -24,6 +24,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
 #include <mach/esdhc.h>
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -68,6 +69,7 @@ struct pltfm_imx_data {
        int flags;
        u32 scratchpad;
        enum imx_esdhc_type devtype;
+       struct pinctrl *p;
        struct esdhc_platform_data boarddata;
 };
 
@@ -467,6 +469,12 @@ static int __devinit sdhci_esdhc_imx_probe(struct 
platform_device *pdev)
        clk_prepare_enable(clk);
        pltfm_host->clk = clk;
 
+       imx_data->p = pinctrl_get_select_default(&pdev->dev);
+       if (IS_ERR(imx_data->p)) {
+               err = PTR_ERR(imx_data->p);
+               goto pin_err;
+       }
+
        if (!is_imx25_esdhc(imx_data))
                host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
@@ -559,6 +567,8 @@ no_card_detect_irq:
                gpio_free(boarddata->wp_gpio);
 no_card_detect_pin:
 no_board_data:
+       pinctrl_put(imx_data->p);
+pin_err:
        clk_disable_unprepare(pltfm_host->clk);
        clk_put(pltfm_host->clk);
 err_clk_get:
@@ -586,6 +596,8 @@ static int __devexit sdhci_esdhc_imx_remove(struct 
platform_device *pdev)
                gpio_free(boarddata->cd_gpio);
        }
 
+       pinctrl_put(imx_data->p);
+
        clk_disable_unprepare(pltfm_host->clk);
        clk_put(pltfm_host->clk);
        kfree(imx_data);
-- 
1.7.0.4


_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to