Fix the comment for the GPIO number used for PHY reset and also avoid passing a hardcoded MAC address.
Signed-off-by: Fabio Estevam <[email protected]> --- Documentation/devicetree/bindings/net/fsl-fec.txt | 6 +----- 1 files changed, 1 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index de43951..3261203 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -9,9 +9,6 @@ Required properties: "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii". - phy-reset-gpios : Should specify the gpio for phy reset -Optional properties: -- local-mac-address : 6 bytes, mac address - Example: fec@83fec000 { @@ -19,6 +16,5 @@ fec@83fec000 { reg = <0x83fec000 0x4000>; interrupts = <87>; phy-mode = "mii"; - phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */ - local-mac-address = [00 04 9F 01 1B B9]; + phy-reset-gpios = <&gpio1 14 0>; /* GPIO1_14 */ }; -- 1.7.1 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
