Sometimes, boards have gpios that don't own by any driver or owner by a generic driver that don't like hacks. Such gpios is normally output and need setup once on boot. So I introduce the config-on-boot gpios.
Signed-off-by: Richard Zhao <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Rob Herring <[email protected]> Cc: Grant Likely <[email protected]> --- arch/arm/boot/dts/imx6q-sabrelite.dts | 7 ++++++ arch/arm/mach-imx/mach-imx6q.c | 35 +++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index e0ec929..1dd2261 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -17,6 +17,13 @@ model = "Freescale i.MX6 Quad SABRE Lite Board"; compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; + config-on-boot { + output-gpios = < + &gpio3 22 0>; /* vbus reset */ + output-gpio-values = < + 1>; /* vbus reset */ + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index b47e98b..577cf19 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -19,6 +19,7 @@ #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/pinctrl/machine.h> @@ -113,6 +114,38 @@ static void __init imx6q_sabrelite_init(void) imx6q_sabrelite_cko1_setup(); } +static void __init imx6q_config_on_boot(void) +{ + struct device_node *np; + struct property *pp; + int cnt, len, i; + int gpio; + + np = of_find_node_by_path("/config-on-boot"); + if (!np) + return; + cnt = of_gpio_named_count(np, "output-gpios"); + pp = of_find_property(np, "output-gpio-values", &len); + if (!pp || cnt != len / sizeof(u32)) { + pr_err("Invalid config-on-boot gpios!\n"); + of_node_put(np); + return; + } + for (i = 0; i < cnt; i++) { + gpio = of_get_named_gpio(np, "output-gpios", i); + if (gpio_is_valid(gpio)) + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, + "config-on-boot"); + } + + of_node_put(np); +} + +static void __init imx6q_post_populate(void) +{ + imx6q_config_on_boot(); +} + static void __init imx6q_init_machine(void) { /* @@ -126,6 +159,8 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + imx6q_post_populate(); + imx6q_pm_init(); } -- 1.7.5.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
