On Mon, May 21, 2012 at 05:23:55PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <[email protected]>
> ---
> arch/arm/boot/dts/imx6q-sabrelite.dts | 18 ++++++++++++-
> arch/arm/boot/dts/imx6q.dtsi | 44 +++++++++++++++++++++++++++++++-
> 2 files changed, 59 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts
> b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 1dd2261..1d28957 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -48,10 +48,26 @@
> status = "okay";
> };
> };
> -
> + iomuxc@020e0000 {
> + gpios {
> + pinctrl_gpio_hog: gpiohog {
This isn't really welcomed, and should really be removed after we have
gpio_request() be able to call pinctrl to set the mux.
> + fsl,pins = <1044 0x80000000
> + 144 0x80000000>;
> /* MX6Q_PAD_GPIO_17__GPIO_7_12 */
Here are what I get from fsl,imx6q-pinctrl.txt. The comment was put on
the wrong line?
MX6Q_PAD_EIM_D22__GPIO_3_22 144
MX6Q_PAD_GPIO_17__GPIO_7_12 1044
> + };
> + };
> + };
> };
>
...
> @@ -495,6 +500,11 @@
> };
> };
>
> + gpios {
> + pinctrl_gpio_hog: gpiohog {
> + };
> + };
> +
Why the empty nodes?
--
Regards,
Shawn
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
