On 06/17/2012 05:51 AM, Roland Stigge wrote: > Hi, > > On 16/06/12 17:06, Stephen Warren wrote: >>> +- nxp,typecodes: groups of 2 bits for each of the 16 pins: >>> + 0: None >>> + 1: LED >>> + 2: Beep >>> + 3: GPIO >>> +- nxp,statecodes: groups of 2 bits for each of the 16 pins: >>> + 0: off >>> + 1: on >>> + 2: pwm0 >>> + 3: pwm1 >>> + >>> +Optional properties: >>> +- nxp,psc: array of 2 numbers: PSC values for the two PWM channels (see >>> datasheet) >>> +- nxp,pwm: array of 2 numbers: PWM values for the two PWM channels (see >>> datasheet) >> >> Shouldn't that all be exposed using a combination of the pinctrl >> bindings that are in 3.5, and the PWM bindings that should be coming in 3.6? > > Thanks for the note! I found a pwm tree that should have this at > > http://gitorious.org/linux-pwm/linux-pwm > > but it gives me server errors. Is there a place where I can have a look?
That URL (with http:// replace with git://) did work for me. It seemed a little slow at first, but did work without issue. I Cc'd Thierry in case there's any other location available. _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
