On 06/25/2012 08:56 AM, Richard Zhao wrote: > This patch supports only the host-mode functionality so far. > > Signed-off-by: Richard Zhao <[email protected]> > Signed-off-by: Marek Vasut <[email protected]> > Cc: Peter Chen <[email protected]> > Cc: Alexander Shishkin <[email protected]> > Cc: Felipe Balbi <[email protected]> > Cc: Greg Kroah-Hartman <[email protected]> > Tested-by: Subodh Nijsure <[email protected]> > --- > .../devicetree/bindings/usb/ci13xxx-imx.txt | 20 ++ > drivers/usb/chipidea/Makefile | 3 + > drivers/usb/chipidea/ci13xxx_imx.c | 197 > ++++++++++++++++++++ > 3 files changed, 220 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt > create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c > > diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt > b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt > new file mode 100644 > index 0000000..8bcd071 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt > @@ -0,0 +1,20 @@ > +* Freescale i.MX ci13xxx usb controllers > + > +Required properties: > +- compatible: Should be "fsl,imx27-usb" > +- reg: Should contain registers location and length > +- interrupts: Should contain controller interrupt > + > +Optional properties: > +- fsl,usbphy: phandler of usb phy that connects to the only one port
> +- fsl,hub-reset-gpios: gpio used to reset on-board usb hub > +- fsl,vbus-power-gpios: gpio used to set vbus power of the only one port These two properties are not implemented, are they? vbus is handled via a fixed regulator. Further I'm looking into the phy and otg implementation. I think the handling of the regulator should go into mxs-phy.c, not into the ci13xxx_imx.c Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
_______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
