Op 26 jul. 2012, om 11:03 heeft "AnilKumar, Chimata" <[email protected]> het volgende geschreven:
> On Thu, Jul 26, 2012 at 14:16:33, Koen Kooi wrote: >> >> Op 25 jul. 2012, om 14:23 heeft AnilKumar Ch <[email protected]> het volgende >> geschreven: >> >>> Add Bosch D_CAN controller device tree data to AM33XX dtsi file >>> by adding d_can device node with all the necessary parameters. >>> >>> Signed-off-by: AnilKumar Ch <[email protected]> >>> --- >>> arch/arm/boot/dts/am33xx.dtsi | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi >>> index 9b974dc..2db2ffb 100644 >>> --- a/arch/arm/boot/dts/am33xx.dtsi >>> +++ b/arch/arm/boot/dts/am33xx.dtsi >>> @@ -163,5 +163,10 @@ >>> #size-cells = <0>; >>> ti,hwmods = "i2c3"; >>> }; >>> + >>> + dcan1: d_can@481D0000 { >>> + compatible = "bosch,d_can"; >>> + ti,hwmods = "d_can1"; >>> + }; >>> }; >> >> I scanned the linux-networking mailinglist and l-o-ml, but I can't find the >> patchset that actually adds the d_can drivers, could you provide a link to >> that? I have 2 different CAN capes I'd like to test on beaglebone. >> > > You can find it from linux-next or net-next trees, D_CAN support is added > to C_CAN driver. > > http://git.kernel.org/?p=linux/kernel/git/davem/net-next.git; > a=commitdiff;h=69927fccd96b15bd228bb82d356a7a2a0cfaeefb Thanks! I'll try merging net-next into l-o master and see if I can get the CAN boards to work. regards, Koen _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
