On 08/13/2012 12:05 PM, Sourav Poddar wrote: > Add tmp102 temperature sensor data in omap5 evm dts file. > > Tested on omap5430 evm with 3.5 custom kernel. > > Cc: Benoit Cousson <[email protected]> > Cc: Felipe Balbi <[email protected]> > Cc: Santosh Shilimkar <[email protected]> > Acked-by: Felipe Balbi <[email protected]> > Signed-off-by: Sourav Poddar <[email protected]> > --- > arch/arm/boot/dts/omap5-evm.dts | 9 +++++++++ > 1 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts > index 200c39a..45a8aeb 100644 > --- a/arch/arm/boot/dts/omap5-evm.dts > +++ b/arch/arm/boot/dts/omap5-evm.dts > @@ -18,3 +18,12 @@ > reg = <0x80000000 0x40000000>; /* 1 GB */ > }; > }; > + > +&i2c4 { > + clock-frequency = <400000>;
Have you checked if we cannot run at faster speed? Reducing the speed will impact every devices on the bus. It might be needed, I just wanted to be sure. You should maybe just add a small comment to explain what the device is doing with potentially a link to the HW spec if available. The same comments are applicable to the bmp085 patch. Regards, Benoit _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
