On Wed, Aug 15, 2012 at 2:25 PM, Arnd Bergmann <[email protected]> wrote: > On Wednesday 15 August 2012, Thierry Reding wrote: >> Yes, that was my understanding as well. So currently I haven't seen any >> problems with this because I only use one of the two host bridges. But I >> suppose I should add code to initialize the bus number aperture properly >> either via platform device resources (for the non-DT case) and the >> device tree otherwise. > > I think when we last discussed this, the assumption was that each > root port has its own config space range and its own pci domain, > so you don't have to worry about bus apertures because each root port > can then have all 255 bus numbers. Has that turned out to be incorrect > now?
If that's the case, there's no problem. I just want to be explicit about the host bridge bus number aperture because I'd like to make pci_scan_root_bus() fail if no aperture is supplied or if the aperture overlaps with something we've already seen. I don't know if that means you want to add a domain and [bus 00-ff] range in device tree, or if you want to make some device tree rule about every host bridge being in its own domain, or what. Bjorn _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
