From: Dong Aisheng <[email protected]> Originally the anatop regulator devices are populated by mfd anatop driver. Since mfd anatop driver will be deleted later, we change to populate the regulator devices by devicetree automatically. This will cause some warning messages as follows during boot due to device recreation: "vdd1p1: Failed to create debugfs directory" But it does not break any function. Later, we will remove mfd anatop driver which can get rid of this error message.
Signed-off-by: Dong Aisheng <[email protected]> --- arch/arm/boot/dts/imx6q.dtsi | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index da2bb71..0ebf853 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -379,7 +379,7 @@ }; anatop: anatop@020c8000 { - compatible = "fsl,imx6q-anatop", "syscon"; + compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; -- 1.7.0.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
