Tony, On Fri, Sep 07, 2012 at 02:28:12, Tony Lindgren wrote: > * AnilKumar Ch <[email protected]> [120905 04:42]: > > Adds GPIO pinctrl nodes to am3358_pinmux master node to control > > user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. > > > > [[email protected]: led0, led1 suggested by koen] > > Signed-off-by: AnilKumar Ch <[email protected]> > > --- > > arch/arm/boot/dts/am335x-bone.dts | 43 > > +++++++++++++++++++++++++++++++++++++ > > 1 file changed, 43 insertions(+) > > > > diff --git a/arch/arm/boot/dts/am335x-bone.dts > > b/arch/arm/boot/dts/am335x-bone.dts > > index c634f87..822efe6 100644 > > --- a/arch/arm/boot/dts/am335x-bone.dts > > +++ b/arch/arm/boot/dts/am335x-bone.dts > > @@ -18,11 +18,54 @@ > > reg = <0x80000000 0x10000000>; /* 256 MB */ > > }; > > > > + am3358_pinmux: pinmux@44e10800 { > > + userled_pins: pinmux_userled_pins { > > + pinctrl-single,pins = < > > + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | > > MODE7 */ > > + 0x58 0x17 /* gpmc_a6.gpio1_22, > > OUTPUT_PULLUP | MODE7 */ > > + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | > > MODE7 */ > > + 0x60 0x17 /* gpmc_a8.gpio1_24, > > OUTPUT_PULLUP | MODE7 */ > > + >; > > + }; > > + }; > > + > > Just checking.. am3358_pinmux should be am33xx_pinmux in this patch > too as discussed. >
Yes, this is also changed in v7. Thanks AnilKumar _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
