Op 6 sep. 2012, om 11:38 heeft AnilKumar Ch <[email protected]> het volgende 
geschreven:

> Adds GPIO pinctrl nodes to am3358_pinmux master node to control
> user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.
> 
> [[email protected]: led0, led1 suggested by koen]
> Signed-off-by: AnilKumar Ch <[email protected]>

Acked-by: Koen Kooi <[email protected]>


> ---
> arch/arm/boot/dts/am335x-bone.dts |   43 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-bone.dts 
> b/arch/arm/boot/dts/am335x-bone.dts
> index c634f87..b0a7409 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -18,11 +18,54 @@
>               reg = <0x80000000 0x10000000>; /* 256 MB */
>       };
> 
> +     am33xx_pinmux: pinmux@44e10800 {
> +             userled_pins: pinmux_userled_pins {
> +                     pinctrl-single,pins = <
> +                             0x54 0x7        /* gpmc_a5.gpio1_21, OUTPUT | 
> MODE7 */
> +                             0x58 0x17       /* gpmc_a6.gpio1_22, 
> OUTPUT_PULLUP | MODE7 */
> +                             0x5c 0x7        /* gpmc_a7.gpio1_23, OUTPUT | 
> MODE7 */
> +                             0x60 0x17       /* gpmc_a8.gpio1_24, 
> OUTPUT_PULLUP | MODE7 */
> +                     >;
> +             };
> +     };
> +
>       ocp {
>               uart1: serial@44e09000 {
>                       status = "okay";
>               };
> 
> +             leds {
> +                     compatible = "gpio-leds";
> +                     pinctrl-names = "default";
> +                     pinctrl-0 = <&userled_pins>;
> +
> +                     heartbeat {
> +                             label = "beaglebone:green:usr0";
> +                             gpios = <&gpio2 21 0>;
> +                             linux,default-trigger = "heartbeat";
> +                             default-state = "off";
> +                     };
> +
> +                     mmc {
> +                             label = "beaglebone:green:usr1";
> +                             gpios = <&gpio2 22 0>;
> +                             linux,default-trigger = "mmc0";
> +                             default-state = "off";
> +                     };
> +
> +                     led2 {
> +                             label = "beaglebone:green:usr2";
> +                             gpios = <&gpio2 23 0>;
> +                             default-state = "off";
> +                     };
> +
> +                     led3 {
> +                             label = "beaglebone:green:usr3";
> +                             gpios = <&gpio2 24 0>;
> +                             default-state = "off";
> +                     };
> +             };
> +
>               i2c1: i2c@44e0b000 {
>                       status = "okay";
>                       clock-frequency = <400000>;
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to